ICAA12 YOKOHAMA

• Home
• Preface
• Proceedings
• Session Search
• Keyword Search
• Search

Session Search

Poster Session

P001	Effects of Mechanical Vibration on Gravity Die Casting of AC4C Aluminum Alloy N. Omura1, T. Tamura1, K. Miwa1, H. Furukawa2, M. Harada2, T. Kubo2 1) National Institute of Advanced Industrial Science and Technology, Japan, 2) Kotobuki Kinzoku Kogyo Co. LTD, Japan
P002	Dissolution and Melting of Constituent Particles in a DC-cast Al-Zn-Mg-Cu Alloy 7150 During Homogenisation H. Chen1, S.X. Gao2, P.A. Rometsch2, D. Xu2, B.C. Muddle2 1) Southwest Aluminium Co. Ltd., China, 2) Monash University, Australia
P003	Prediction Method of Crack Sensitivity during DC Casting of Al-Mn and Al-Mg Series Aluminum Alloys M. Morishita1, M. Abe1, M. Yoshida2 1) Kobe Steel Ltd., Japan, 2) Waseda University, Japan
P004	Microstructure and Property Variation of Roll-bonded 4xxx/3003/4xxx Aluminum Clad Sheets with Thermomechanical Process K.J. Euh, J.H. Kang, S.H. Kim, H.W. Kim, D.B. Kim Korea Institute of Materials Science, Korea
P005	The Effects of Low Frequency Electromagnetic Field on Multi-physical Fields during the Start-up Phase of DC Casting Process H. Zhang1, J. Cui1, H. Nagaumi2 1) Northeastern University, China, 2) Suzhou Institute for Nonferrous Metals Research, China
P006	Deformation Behavior and Microstructure Evolution of an Aircraft Al-Cu-Mg-Mn Alloy at the Elevated Temperature Y. Huang, Z. Chen, S. Li, W. Yang Central South University, China
P007	Surface Segregation in DC-cast Aluminium AA5182, Measured in GDMS (Glow Discharge Mass Spectrometer) and Discussed in View of the Phase Diagram A.L. Dons1, T. Furu2 1) SINTEF Metallurgi, Norway, 2) Norsk Hydro, Norway
P008	Evolution of the Nanostructure of a 7xxx Alloy During Retrogression and Re-ageing as Investigated by ASAXS and Atom Probe Tomography T. Marlaud1,2, A. Deschamps2, W. Lefebvre3 1) Rio Tinto Alcan, France, 2) SIMAP, France, 3) Groupe de Physique des Materiaux, France
P009	Surface Segregation in Aluminium AA6xxx, Measured in GDMS(Glow Discharge Mass Spectrometer) and Calculated with Alsim/Alstruc A.L. Dons1, K. Ellingsen1, T. Furu2, B.R. Henriksen3, D. Mortensen4 1) SINTEF Metallurgi, Norway, 2) Norsk Hydro, Norway, 3) Elkem Aluminium, Norway, 4) Institute for Energy Technology, Norway
P010	Thermoelectric Power Characterization of 7xxx Aluminium Alloys during Ageing S. Chen1, R. Frinking2, C. Lahaye1, M. van der Winden1, A. Bürger3 1) Corus Research, Development & Technology, Netherlands, 2) Delft University of Technology, Netherlands, 3) Aleris Aluminium Koblenz GmbH, Germany
P011	Effects of Alloying Additions and Cooling Rate on the Microstructures and Mechanical Properties of the Cast Al-Mg-Si Alloys J.M. Lee1, K.H. Kim1, H.J. Kim1,2, Y.S. Ahn2 1) Korea Institute of Materials Science, Korea, 2) Pukyung National University, Korea
P013	In-line Degassing Treatment of A356 Alloy Using the Electromagnetic Melt Transferring Pump J.M. Lee1, H.S. Sim2, V. Dubodelov3, V. Fikssen3, M. Slazhniev3 1) Korea Institute of Materials Science, Korea, 2) Dongsan Tech., Co., Ltd., Korea, 3) Physico-Technological Institute of Metals and Alloys, Ukraine
P014	Microstructure Behavior of Al-Mg-Si Alloy Processed by ECAP and Its Thermal Stability T. Kovářík1, J. Zrník2 1) Univerzitní 22, Plzeň, Czech Republic, 2) Comtes FHT Ltd., Czech Republic
P015	Effect of Ca Addition on Microstructure of Semi-Solid Al-Zn-Mg Al Alloys During Reheating H.W. Park, I.S. Jeong, Y.H. Kim, S.G. Lim Gyeongsang National University, Korea
P016	Dissimilar Metal Joining of 2024 and 7075 Alloy to Titanium Alloys by Friction Stir Welding M. Aonuma1, K. Nakata2 1) Tokyo Metropolitan Industrial Technology Research Institute, Japan, 2) Osaka University, Japan
P017	Effect of Ultrasonic Treatment on the Microstructures and Mechanical Properties of Die Casting Aluminum Alloys G.S. Cho, Hun-Jang, K.H. Choe, W.Y. Kim Korea Institute of Industrial Technology, Korea
P018	Laser Joining of Different Materials between Aluminum and Plastic Using Insert Materials M. Hino1, Y. Mitooka1, K. Murakami1, K. Uragami2, T. Kanadani3 1) Industrial Technology Research Institute of Okayama Prefecture, Japan, 2) Hayakawa Rubber Co. Ltd., Japan, 3) Okayama University of Science, Japan
P019	Characterization of Dendrite Morphology for Al-based Alloy by Phase-field Model Y. Natsume, H. Ishida Kobe Steel, Ltd., Japan
P020	Deformation Process on Magnetic Pressure Seam Welding of Aluminum Sheets M. Miyazaki1, K. Sasaki2, M. Okada2 1) Nagano National Collage of Technology, Japan, 2) Asahikawa National collage of Technology, Japan
P021	Mechanical Behaviors and Stability of Al-rich Al-Mg-B Alloys J.I. Cho1, S. Kim2 1) Korea Institute of Industrial Technology, Korea, 2) University of Wisconsin-Madison, USA
P022	Instability of Microstructure in Friction Stir Welded 5083 Aluminum Alloy Sheets during Post-Weld Heat Treatment T. Shibayanagi, T. Yoshioka, K. Ikeuchi Osaka University, Japan
P023	Mechanical and Die Soldering Properties of Al-Si-Mg Alloys with Vacuum HPDC Process C.Y. Jeong1, Y.S. Kim1, J.H. Ryu1, H.J. Kim2 1) Dongguk University, Korea, 2) Pukyong National University, Korea
P024	The Effect of Zn-based Alloys Coating on Bondability of Resistance Spot Welding of Steel/Aluminum Alloy Dissimilar Joint K. Ueda1, T. Ogura1, S. Nishiuchi1, K. Miyamoto2, T. Nanbu2, A. Hirose1 1) Osaka University, Japan, 2) Nissan Motor Co., Ltd., Japan
P025	Influence of Silicon, Superheat and Injection Speed on the Fluidity of HPDC Al-Si Alloys Y.C. Kim1, S.W. Choi1, J.I. Cho1, C.W. Kim 1, C.S. Kang1, S.K. Hong2 1) Korea Institute of Industrial Technology, Korea, 2) Chonnam National University, Korea
P026	Cold Joining of Aluminium Sheets by Shot Peening Y. Harada1, M. Nunobiki1, Y. Kobayashi2 1) University of Hyogo, Japan, 2) Sintokogio, Ltd., Japan
P027	Hydrogen Trapping Affected by Cr in Rapidly Solidified Aluminium I.I. Tashlykova-Bushkevich1, T. Shikagawa2, V.G. Shepelevich3, G. Itoh2 1) Belarusian State University of Informatics and Radioelectronics, Belarus, 2) Ibaraki University, Japan, 3) Belarusian State University, Belarus
P028	Material Flow, Stir Zone Growth and Complex Deformation Modes in Friction Stir Welding of Single Crystal Pure Aluminum T. Shibayanagi1, K. Mizushima1, A.P. Gerlich2, T.H. North3, K. Ikeuchi1 1) Osaka University, Japan, 2) University of Alberta, Canada, 3) University of Toronto, Canada
P029	Patterns of Concentration-Depth Profiles in Melt-Substrate Quenched Aluminium Alloys I.I. Tashlykova-Bushkevich Belarusian State University of Informatics and Radioelectronics, Belarus
P030	Microstructure and Joint Strength of Friction Stir Spot Welded Aluminum Alloy Sheets and Plated Steel Sheets K. Feng, M. Watanabe, S. Kumai Tokyo Institute of Technology, Japan
P031	Hot Tearing of Thin-walled Al-Mg Alloy in Die-casting S.W. Choi1, Y.C. Kim1, J.I. Cho1, S.K. Hong2, C.S. Kang1 1) KITECH, Korea, 2) Chonnam National University, Korea
P032	Interfacial Microstructure and Mechanical Properties of Dissimilar Friction Stir Weld between AA6061-T6 and Ti-6Al-4V K.J. Lee1, K.S. Bang1,2, H.S. Bang2, H.S. Bang2 1) Korea Institute of Industrial Technology, Korea, 2) Chosun University, Korea
P033	PC Programmed Automatic Level Control for Quality Casting Using the Precimeter Control System J. Strömbeck1, T. Jarlsmark1, M. Terner1, J. Wilkins2, M. Suzuki3 1) Precimeter Control AB, Sweden, 2) Sentech Precimeter Inc., USA, 3) Ai Precimeter Co., Ltd., Japan
P034	Temperature Measurement during Friction Stir Welding of Dissimilar Aluminum Alloys Y. Takayama, Y. Akutsu, N. Choshiro, H. Kato, H. Watanabe Utsunomiya University, Japan
P035	Interfacial Microstructure of Sticking Phenomena between Die Casting Dies and Molten Al-Si Alloys S. Saikawa1, T. Kawabata2, M. Miura1, N. Sakai1, T. Gonoji2, J. Nakamura2, S. Ikeno2, K. Matsuda2 1) Ahresty Co., Ltd., Japan, 2) University of Toyama, Japan
P037	Development of Vibrating Cooling Slope (VCS) Method for Enhancing a Globular Structure in Aluminum A356 alloy F. Akhlaghi, A. Taghani University of Tehran, Iran
P038	Investigation of Aluminum Coating with Dispersed Nanoscale Quasicrystalline Particles Produced by Cold Spray M. Fujita1, M. Hishida1, K. Sakaki2, M. Sakaguchi3, M. Okazaki3 1) Honda R&D Co., Ltd., Japan, 2) Shinshu University, Japan, 3) Nagaoka University of Technology, Japan
P039	Apparatus Design and Electromagnetic Continuous Casting Process for Near Net-Shaped Aluminum Alloy Billet J.H. Kim1, M.G. Kim1, J. Kim1, J.P. Park1, G.C. Lee1, I.S. Cho2 1) Research Institute of Industrial Science and Technology, Korea, 2) Korea Institute of Industrial Technology, Korea
P040	Influence of Magnesium on Formation and Growth of Nitride Layer on Aluminum Substrate M. Yoshida1, M. Okumiya2, Y. Tsunekawa2 1) Shizuoka Institute of Science and Technology, Japan, 2) Toyota Technological Institute, Japan
P041	Effect of Melt Shearing on Morphological Change of Iron-bearing Intermetallic Phases in the Al-Si Casting Alloys B. Kim1, S. Lee1, J. Kim2, J. Park2 1) Korea Institute of Industrial Technology, Korea, 2) Hanbat National University, Korea
P042	Effect of Machining Parameter on Microstructural Characteristics of Iron-Silicon Alloyed Layer of 5083 Al Alloy by EDA Processing H.M. Lin1, S. Kuralay2, J.Y. Uan2 1) Far East University, Taiwan, 2) National Chung Hsing University, Taiwan
P043	Microstructure and Mechanical Properties of Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process K. Eidhed1, H. Tezuka2, T. Sato2 1) King Mongkut's University of Technology North Bangkok, Thailand, 2) Tokyo Institute of Technology, Japan
P044	Repair of Surface Defects in Cast Products by Friction Stir Processing Method T. Knych, M. Blicharski, P. Uliasz AGH University of Science and Technology, Poland
P045	SiC/Aluminum Composites Fabricated by in situ Processing using Reactive Infiltration Aid M. Kobashi, M. Hirako, N. Kanetake Nagoya University, Japan
P046	Effects of Magnesium on Precipitated Phase in 7150 Aluminum Alloy Based on Thermodynamics J. He, T. Zhou, P. Liu Beijing University of Aeronautics and Astronautics, China
P047	Foaming Behavior and Cell Morphology of Rolled Sheet Precursors Made of Pure Aluminum, 6061Al, Al-7Si powders M. Kobashi, M. Noguchi, N. Kanetake Nagoya University, Japan
P048	Choice of Rational Alloying Concentration Intervals and Modifying of Al-Cu-Mg and Al-Zn-Mg-Cu Systems Aluminium Alloys B.V. Ovsyannikov1, V.M. Zamyatin2, V.L. Smirnov2, V.S. Mushnikov2 1) Kamensk Uralsky, Russia, 2) Ural State Technical University, Russia
P049	Effect of Compaction Temperature on Sinterability of Magnesium and Aluminum Powder Mixtures by Warm Compaction Method T. Iwaoka1, M. Nakamura2 1) Tokyo Metropolitan Industrial Technology Research Institute, Japan, 2) Iwate University, Japan
P050	Calculation and Experimental Investigation of Structure and Phase Composition of 6XXX Alloys P. Bryantsev, M. Samoshina National University of Science and Technology "MISiS", Russia
P051	Fabrication of CNF Reinforced Aluminum Composites by Compressive Torsion Processing H. Kimura, Y. Kume, M. Kobashi, N. Kanetake Nagoya University, Japan
P052	Nanoindentation Measurement of Interfacial Reaction Layers in Aluminum and Steel Dissimilar Metals Joints with Alloying Elements T. Ogura, K. Ueda, Y. Saito, A. Hirose Osaka University, Japan
P053	Thermal Stability of Nanostructured Pure Aluminium Produced by Mechanical Milling and Spark Plasma Sintering M. Kubota1, B.P. Wynne2 1) Nihon University, Japan, 2) The University of Sheffield, UK
P054	Precipitation Kinetics in an Al-Zn-Mg Alloy by New Rate Equation H. Yoshida1, S. Yamamoto2 1) Sumitomo Light Metal Industries, Ltd., Japan, 2) Kyoto University, Japan
P056	Effect of Ultrasound Treatment on Age-Hardening Response in an Al-Mg-Si Alloy S. Hirosawa1, J. Kamibeppu1, M. Iqbal1,H. Hosoda2, T. Sato2 1) Yokohama National University, Japan, 2) Tokyo Institute of Technology, Japan
P057	Novel Aluminium Based Composite Materials Exhibiting Magnetic Properties Fabricated by Mechanical Alloying and Spark Plasma Sintering S. Aoki, M. Kubota Nihon University, Japan
P058	Development of G-P Zones on {111}Al Planes During Natural Aging of an Al-Zn-Mg-Cu-Zr Alloy A.K. Mukhopadhyay, K.S. Prasad Defence Metallurgical Research Laboratory, India
P059	The Effect of Zirconium and Scandium Additions on Electrical Resistance, Strength and Thermal Stability of Cold Rolled Aluminium Sheets A.N. Alabin1, N.A. Belov1, A.Y. Prokhorov2, N.Y. Tabachkova1 1) National Research and Technological University "MIS&A", Russia, 2) OAO "Kirskabel", Russia
P061	Effect of Cryorolling on the Microstructure and Mechanical Properties of AA2198 alloy B. Srinivasarao, W. Lefebvre Groupe de physique des Matériaux, France
P062	Modeling of the Retrogression Microstructure Behavior of 7075 Aluminum Alloy B. Nie1, P. Liu1, T. Zhou1, Z. Zhang1, Z. Du2 1) Beihang University, China, 2) General Research Institute for Nonferrous Metals, China
P064	Al Alloys Development Assisted by Thermodynamic Kinetics Phase Field Simulations and Experiments N. Masquelier1, S.G. Fries1,2, H. Zapolsky1, W. Lefebvre1, R. Patte1, P. Pareige1 1) Université et INSA de Rouen, France, 2) Ruhr-University Bochum, Germany
P065	Mechanical Properties of Al/Al-Mg/Al Clad Sheets Fabricated by Roll Bonding Process H.W. Kim1, M.G. Kim, J. Cho, S.H. Kim Korea Institute of Materials Science, Korea
P066	Application of the Diagrams of Phase Transformations during Aging for Optimizing the Aging Conditions for V1469 and 1441 Al-Li Alloys E.A. Lukina, A.A. Alekseev, V.V. Antipov, D.V. Zaitsev, Y.Y. Klochkova All-Russia Scientific Research Institute of Aviation Materials, Russia
P067	Sectional Shape Analysis of Aluminum Alloy Seat Tube of Bicycle D.C. Chen, M.W. Guo, C.S. You, C.H. Jao National Changhua University of Education, Taiwan
P069	Influence of Scandium Content, Additional Alloying Elements and Strain Parameters on Properties of AlMgSc System Alloy Products B.V. Ovsyannikov Kamensk Uralsky, Russia
P071	Developing a Predictive Weld-Seam Formation Model: Experimental Support A.J. den Bakker1, R.J. Werkhoven2, W.H. Sillekens2, L. Katgerman3 1) Nedal Aluminium, Netherlands, 2) TNO Science & Industry, Netherlands, 3) Delft University of Technology, Netherlands
P072	Variation of Aging Behavior for Al-Mg-Si Alloys with Different TMs Addition S. Wang, K. Matsuda, T. Kawabata, S. Ikeno University of Toyama, Japan
P073	The Effect of Extrusion Temperature on Recrystallized Grain Structures of Extruded Al-Mg-Si Alloys K. Ihara, T. Shikama Kobe Steel, Ltd., Japan
P074	Effect of Transition Metals on Aging Behavior of Al-Mg-Si Alloys T. Nagai, K. Matsuda, H. Nishita, J. Nakamura, T. Kawabata, S. Ikeno University of Toyama, Japan
P075	Development of Mobile Phone Case with Decorative Surface by Two-Stage Forming Process T.C. Cheng1,2, Y.Y. Chu1,2, C.C. Wang1,2 1) Metal Industries Research and Development Centre, Taiwan, 2) National Cheng Kung University, Taiwan
P076	Precipitation in a High-strength Al-Cu-Li Alloy J.C. Shih, M. Weyland, B.C. Muddle Monash University, Australia
P077	Grain Shape Evolution and Prediction for AA6082 A. Segatori1, A. Foydl2, L. Donati1, A. Brosius 2, L. Tomesani1, A.E. Tekkaya2 1) University of Bologna, Italy, 2) Technische Universität Dortmund, Germany
P078	Effects of 0.5wt% In on Precipitation Processes in Al-Cu-(Li) Alloys Z.R. Pan, Z.Q. Zheng, S.C. Li, Z.Q. Liao Central South University, China
P079	Influence of Grain Size and Lubricant on Forming of Micro-parts by Forward-Backward Extrusion of 6063 Aluminum Alloy N. Takatsuji1 , S. Hosokawa1 , K. Dohda2, T. Makino2 1) University of Toyama, Japan, 2) Nagoya Institute of Technology, Japan
P080	Phase Reactions of Al-Ti-B Ternary and Al-Ti-B-O Quaternary Systems for Al-based Metal Matrix Composites H. Hosoda, T. Inamura, T. Shimoyamada, H. Noma, K. Wakashima Tokyo Institute of Technology, Japan
P081	Forming of Aluminum Helical Gear by Twist Extrusion Processing N. Takatsuji1, Y. Takarada1, T. Aida1, K. Tanpa2 1) University of Toyama, Japan, 2) Masuoka Co., Ltd., Japan
P082	Al3Zr and Al3(Zr,Sc) Dispersoids and their Interaction with Solute Elements Investigated by Atom Probe Tomography and Scanning Transmission Electron Microscopy W. Lefebvre1, K. Hoummada2, B. Srinivasa Rao1 1) Groupe de Physique des Matériaux, France, 2) Université Paul Cézanne Laboratoire, France
P083	Use of Resin Tooling with Sheet Metal Hydroforming for the Manufacture of Aluminum Alloy Cases C.T. Wu1,2, M.F. Li1, C.C. Wang1, K.S. Wang3, W.W. Zheng3 1) Metal Industries Research & Development Centre, Taiwan, 2) Cheng Kung University, Taiwan, 3) Hua-Chuang Automobile Information Technical Center, Taiwan
P084	Effect of Additional Elements on the Age Harding Behavior of Al-Zn-Mg-Si alloys H. Tokugawa1, K. Iida1, J. Nakamura1, K. Matsuda1, T. Kawabata1, S. Ikeno1, T. Yoshida2, S. Murakami2 1) University of Toyama, Japan, 2) Aisin keikinnzoku Co. Ltd., Japan
P085	Development of High-strength Aluminum Extrusion Alloy for Automobile Bumper H. Cho1, S.D. Kim1, C.G. Kim2, J.H. Kim2 , C. Lee2 1) Korea Institute of Industrial Technology, Korea, 2) KORES Co., Ltd., Korea
P086	Influence of Ge-Si Additions on Ageing Response and Properties in 2xxx Alloys L. Zhuang1, S. Chen1, A.F. Norman1, M. van der Winden1, A. Bürger2, S. Spangel2 1) Corus Research, Development & Technology, Netherlands, 2) Aleris Aluminium Koblenz GmbH, Germany
P087	Experimental Observation of Elasto-Plasticity Behavior of Type 5000 and 6000 Aluminum Alloy Sheets S. Tamura 1, S. Sumikawa 1, T. Uemori 2, H. Hamasaki1, F. Yoshida1 1) Hiroshima University, Japan, 2) Kindai University, Japan
P088	The Effect of Alloying Elements on the Metastable Zr Solid Solubility and Precipitation of L12 Al3Zr Precipitates in Aluminium Alloys Z. Jia1, J. Friis1,2 B. Forbord2,3, J.K. Solberg1, K. Marthinsen2 1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway, 3) Scandpower AS, Norway
P089	Springback Analysis of Aluminum Alloy Sheet with Special Reference to Effect of Planar Anisotropy T. Uemori1, S. Sumikawa2, S. Tamura2, H. Akagi1, F. Yoshida2 1) Kindai University, Japan, 2) Hiroshima University, Japan
P090	The influence of Mg/Si Ratio on Phase Compositions in 2014 Aluminium Alloys after Casting and Heat Treatment M.L. Grega The Institute of Non-Ferrous Metals, Poland
P091	Effects of Fe and Mn Additions on Semi-solid Microstructures of Al-Mg-Si Based Alloys in Deformation-Semi-Solid- Forming Process C. Phongphisutthinan, H. Tezuka, T. Sato Tokyo Institute of Technology, Japan
P092	Investigation of Non-isothermal Aging Process of 7085 Aluminum Alloy K. Li1, K. Zhang2, L. Yang1, J.Z. Chen2, L. Zhen1, (J. Jiang') 1) Harbin Institute of Technology, China, 2) Beijing Institute of Aeronautical Materials, China
P093	Effect of Electrolyte Species on Crystallinity and Dielectric Properties of Anodic Oxide Films Formed on Aluminum Y. Sato, H. Asoh, S. Ono Kogakuin University, Japan
P094	Evolution of the Microstructure of a {100} <001> Pure Aluminum Single Crystal during Severe Plastic Deformation K. Kashihara1, W. Ikushima1, Y. Miyajima2, D. Terada2, N. Tsuji2 1) Wakayama National College of Technology, Japan, 2) Kyoto University, Japan
P095	Effect of Temperature and Heating Rate on Mechanical Properties of Aluminum Alloy 6061 B. Chen, J. Luo, Q. Yuan Chongqing University, China
P096	Structural Evolution in Aluminum-Copper-Lithium-Magnesium Alloy Sheets during Processing V. Shamray1, O. Grushko2, V. Timofeev1, E. Lazarev1, J. Klochkova2 1) Russian Academy of Sciences, Russia, 2) All-Russian Institute of Aviation Materials, Russia
P097	Effect of Heating-rate on the Thermal-mechanical Behavior of Pre-loaded Aluminium Alloy 6061-T6 B. Chen, Q. Yuan, J. Luo Chongqing University, China
P098	Effects of Impurities on the Grain Growth of Aluminium Film Y. Sasajima, T. Kato, T. Nagai, J. Onuki Ibaraki University, Japan
P099	Consolidation of Rapidly Solidified Aluminum Alloy Powder by High Pressure Torsion H. Adachi1, A. Tanaka2, J. Kusui2, Z. Horita3 1) Kyoto University, Japan, 2) Toyo Aluminum K. K., Japan, 3) Kyushu University, Japan
P100	Work Hardening and Softening of 4-6N Aluminum in the Processing of Cold Rolling and Heat Treatments A. Ikeda, K. Yoshida, M. Takeda Yokohama National University, Japan
P101	Effect of Pre-aging on Microstructure and Mechanical Property of Al-0.2wt% Sc Deformed by ARB E. Borhani, H. Jafarian, T. Sato, D. Terada, Y. Miyajima, N. Tsuji Kyoto University, Japan
P102	Development of Ultra-fine Grained Structure in an Al-5.4%Mg-0.5%Mn Alloy Subjected to Severe Plastic Deformation A. Kipelova, I. Nikulin, S. Malopheyev, R. Kaibyshev Belgorod State University, Russia
P104	Prediction of Anisotropy and Yield Surface of Aluminum Sheet by Polycrystal Plasticity Theory K. Kitayama1, T. Kobayashi1, T. Uemori2, F. Yoshida1 1) Hiroshima University, Japan, 2) Kindai University, Japan
P105	Microstructure and Deformation Properties of AA5352/Al-6%Mg Sheet Produced by the Direct Chill Casting FusionTM Process H. Jin1, B. Wagstaff2, M. Gallerneault1, D.J. Lloyd1 1) Novelis Global Technology Centre, Canada, 2) Novelis Solatens, USA
P106	Microstructure Evolution at Ambient Temperature of 5N Purity Aluminum after Compression at Ambient and Liquid Nitrogen Temperatures Y. Takayama, D. Furuguchi, S. Suzuki, H. Kato Utsunomiya University, Japan
P107	The Optimization of Strength and Ductility in Heat Treated ADC12 Alloys R.N. Lumley, N. Deeva, M. Gershenzon CSIRO Light Metals Flagship, Australia
P109	Tensile Properties and Work Hardening Behaviour of Alloy 6016 in Naturally Aged and Pre-aged Conditions H. Zhong1,2, P.A. Rometsch2, L. Cao2, F. Guo1, B.C. Muddle2 1) Suzhou Nonferrous Metals Research Institute, China, 2) Monash University, Australia
P110	Corrosion of Aluminum Die-castings Jointed with Rubber M. Mori1, N.L. The1, G. Itoh1, N. Itoh1, Y. Shimada2 1) Ibaraki University, Japan, 4) Yamashita Rubber Co., Ltd., Japan
P111	Atom Probe Tomography Characterisation of Solute Clustering in AA6111 S. Li1,2, R.K.W. Marceau1,2, G. Sha1,2, W.J. Poole3, S.P. Ringer1,2 1) ARC Centre of Excellence for Design in Light Metals, Australia, 2) The University of Sydney, Australia, 3) The University of British Columbia, Canada
P112	Influence of Cell Size on Die Bending of Aluminum Alloy Honeycomb Structure Y. Takayama, Y. Kitanosono, E. Watanabe, H. Watanabe, H. Kato Utsunomiya University, Japan
P113	Effect of Alloying Elements on High Temperature Mechanical Properties for Piston Alloy C.Y. Jeong, J.H. Ryu, Y.S. Kim Dongguk University, Korea
P114	Mechanical and Wear Properties of Al-10Mg-Si Alloys Produced by Rapid Solidification and Powder Metallurgy Process H. Egawa, M. Kubota Nihon University, Japan
P115	Strengthening of Aluminum Foams through Vacuum Impregnation with Epoxy Resin T. Takeda, R. Suzuki, K. Kitazono Tokyo Metropolitan University, Japan
P116	New Theoretical Approach to Properties of Aluminum Alloys Based on Chemical Bond Nature of Constituent Atoms S. Yamamoto1, M. Takeda2 1) Kyoto University, Japan, 2) Yokohama National University, Japan
P117	Effects of Clusters and Precipitates on Tensile Properties in Al-Mg-Si Alloys K. Ikeda1, K. Terada1, M. Mitsuhara1, S. Hata1, H. Nakashima1, K. Takata2, M. Saga2, J. Takahashi2, K. Ushioda2, K. Kaneko1, M. Kikuchi1 1) Kyushu University, Japan, 2) Nippon Steel Corporation, Japan
P118	Explanations of Solid Solution Hardening (Softening), Age-Hardening (Softening) and Work Hardening (Softening) Based on Chemical Bonds T. Tanabe, S. Yamamoto Kyoto University, Japan
P119	Study on Dimensional Stability of Csf/Al Composites G. Chen, L. Jiang, X. Wang, Z. Xiu, G. Wu, D. Sun Harbin Institute of Technology, China
P120	An Experimental Study on Solid Solution Softening, Age Softening and Work Softening M. Takeda1, T. Tanabe2 1) Yokohama National University, Japan, 2) Kyoto University, Japan
P121	Characterization of the AC2A Cylinder Head and Development of Its Heat Treatment Process W. Kasprzak1, H. Onda2, M. Aniolek1, J.H. Sokolowski3, K. Akiyama2 1) CANMET Materials Technology Laboratory, Canada, 2) Nissan Motor Co, Ltd., Japan, 3) University of Windsor, Canada
P122	Image-based Simulation of Monotonic Crack Propagation through a 2024 Aluminum Alloy H. Tsuruta1, H. Toda1, P. Qu 1, M. Kobayashi1, E. Maire2 1) Toyohashi University of Technology, Japan, 2) GEMPPM UMR, France
P123	Scandium Effect on Mechanical and Physical Properties for 2x19 Al Alloy Y.Y. Lee Agency for Defense Development, Korea
P124	A comparison of Air-fuel and Low-temperature Oxyfuel Burners for Aluminium Heating and Melting J. Furu1, T.H. Bergstrøm2, K. Marthinsen1 1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway
P125	The Effect of Zr, Misch Metal on Microstructure and Mechanical Properties of A6061 Alloy S.H. Kim1, K.D. Woo1, D.S. Kang1, E.P. Kwon1, J.Y. Jeon1, K.J. Lee2 1) Chonbuk National University, Korea, 2) Korea Institute of Industrial Technology, Korea
P126	Visualization of Diffusive Hydrogen in Aluminum T. Watakabe1, G. Itoh1, Y. Hatano2 1) Ibaraki University, Japan, 2) University of Toyama, Japan
P127	Novel Al-Cu-Mg-Ag Alloy for High Temperature Applications I. Nikulin1, A. Kipelova, M. Gazizov, V. Teleshov, V. Zakharov, R. Kaibyshev Belgorod State University, Russia
P128	Behavior of Hydrogen in Electrolitically Charged Aluminum Investigated by Means of Hydrogen Microprint Technique T. Tsutsumi, T. Watakabe, G. Itoh, N. Itoh Ibaraki University, Japan
P129	Rapid Heating and Mechanical Properties of 6061 Aluminum Alloy Using High Frequency Induction Heating Apparatus F. N. Shang1, E. Sekiya2, Y. Nakayama1 1) University of Yamanashi, Japan, 2) YS Electrics Co., Ltd., Japan
P130	Detection of Hydrogen in Ion-plated Pure Aluminum during Tensile Deformation G. Itoh, H. Iwahashi, T. Shikagawa Ibaraki University, Japan,
P131	Research on Influence of Forming Conditions on Springback in V-bending Process of Aluminum Sheet Alloys Y. Ishii, S. Takahashi Nihon University, Japan
P132	Effect of High Magnetic Field on Phase Transformation of 7055 Alloy during Homogenization H. Lizi1, L. Xiehua2, Z. Haitao1, C. Jianzhong1 1) Northeastern University, China, 2) Chalco Ruimin Corporation Limited, China
P133	Coupled Surface and Microstructural Observations of Damage Accumulation during Bending of Al-Mg-Si Alloys A. Wise1, T. Chezan1, J. Pool1, R. Rana1, P. De Smet2 1) Corus RD&T, Netherlands, 2) Aleris Aluminum Duffel BVBA, Belgium
P134	Fabrication of Porous Aluminum by Friction Stir Processing Route Precursor Method and its Mechanical Properties Y. Hangai1, O. Kuwazuru2, S. Koyama1, M. Hasegawa3, T. Utsunomiya4, N. Yoshikawa5 1) Gunma University, Japan, 2) University of Fukui, Japan, 3) Yokohama National University, Japan, 4) Shibaura Institute of Technology, Japan, 5) The University of Tokyo, Japan
P135	The Effects of Microstructural Characteristics and Casting Defects on the Mechanical Failure of Al-based Alloys I. Peter, M. Rosso Politecnico di Torino, Italy
P136	Transfer and Sloshing Control of Molten Metal Using a Ladle with 6-Degrees-of-Freedom Robot Arm in Die Cast Process T. Yamashita, W. Aribowo, K. Terashima Toyohashi University of Technology, Japan
P137	Fatigue Strength of Al-evaporated Al-Zn Alloys with High Zn Concentration T. Kanadani1, K. Nakagawa1, A. Sakakibara2, K. Murakami3, M. Hino3, N. Nishida3 1) Okayama University of Science, Japan, 2) Okayama University, Japan, 3) Industrial Technology Research Institute of Okayama Prefecture, Japan
P138	Investigation on Quench Sensitivity Characterization of Selected Heat-treatable Al Alloys Based on Jominy End Quench Z. Li, B. Xiong ,Y. Zhang, B. Zhu, X. Li, H. Liu, F. Wang, P. Li, J. Liu General Research Institute for Non-ferrous Metals, China
P139	Analysis of Crack-Tip Field via Observation of Local Crack Extension by Means of Fast Tomography Technique S. Yamauchi1, H. Toda1, M. Kobayashi1, T. Hiramatsu1, E. Maire2 1) Toyohashi University of Technology, Japan, 2) GEMPPM UMR, France
P140	Effect of Mg and Zn Elements on the Mechanical Properties and Precipitates in 2099 Alloy X.H. Zhu, Z.Q. Zheng, S. Zhong, H.Y. Li Central South University, China
P141	Softening and Fatigue Fracture of Al-Si-X Alloys J. Oshikiri1, N. Nakamura2, O. Umezawa1 1) Yokohama National University, Japan, 2) Kanagawa Industrial Technology Center, Japan
P142	Microstructure and Properties of an Al-7. 5Zn-1. 7Mg-1. 4Cu-0. 12Zr Alloy X. Li, B. Xiong, Y. Zhang, Z. Li, B. Zhu, F. Wang, H. Liu General Research Institute for Nonferrous Metals, China
P143	Evolution of Internal Stress During Cyclic Deformation of Al-4Cu as a Function of θ′ Precipitate State W. Han1, A. Vinogradov2, C.R. Hutchinson1 1) Monash University, Australia, 2) Osaka City University, Japan
P144	Researches Concerning PoDFA Method for 5083 Alloys M.A. Pana, P. Moldovan University Politehnica of Bucharest, Romania
P145	Structure and Properties of Semiproducts from Al-Cu-Mg-Ag V-1213 Alloy V.V. Antipov, R.O. Vakhromov, T.P. Phedorenko, E.A. Lukina All-Russian Institute of Aviation Materials, Russia
P146	Effect of Magnesium Content on Age Hardening in Al-Si-Mg Alloy Castings T. Ishikawa1, T. Kitamura2, M. Furui1, S. Ikeno1, M. Miura2, S. Saikawa2, N. Sakai2 1) University of Toyama, Japan, 2) Ahresty Corporation, Japan
P147	Effects of Crystallographic Orientation on Tensile Deformation in the Excess-Mg Type Al-Mg-Si Alloys K. Iida1, K. Matsuda1, Y. Uetani2, S. Ikeno1 1) University of Toyama, Japan, 2) Toyama Prefectural University, Japan
P148	Effect of Mg , Si and Mn Content on Castability in Al-Mg Alloy Y. Kano1, M. Furui1, S. Ikeno1, M. Miura2, S. Saikawa2 1) University of Toyama, Japan, 2) Ahresty Corporation, Japan
P149	Simulation of Elastoplastic Behavior of Casting Aluminum Alloy Using Artificial Neural Network B. Chen, Q. Yuan, G. Chen, H. Liu Chongqing University, China
P150	Improving the Mechanical Performance of a Secondary Cast Aluminium Piston Alloy through Addition of Minor Elements T.O. Mbuya1, B.R. Mose2, S.P. Ng'ang'a2, S.M. Maranga2 1) University of Nairobi, Kenya, 2) Jomo Kenyatta University of Agriculture and Technology, Kenya

>>TOP