ICAA12 YOKOHAMA

Proceedings

PL01
pdfPlenary
Innovative Development of Aluminium Research and Technologies in Japan
T. Sato
Tokyo Institute of Technology, Japan
PL02
pdfPlenary
Developing Environmentally Friendly Motor Vehicle Technologies Eyeing 2020 and Beyond
Y. Daisho
Waseda University, Japan
PL03
pdfPlenary
Current Status of Research and Industries of Al Sheets in China
Q. Liu1, L. Lin2
1) Chongqing University, China, 2) Southwest Aluminum Group Corp Ltd., China
PL04
pdfPlenary
Precipitation in 6xxx Aluminum Alloys
R. Holmestad1, C.D. Marioara2, F.J.H. Ehlers1, M. Torsæter1, R. Bjørge1, J. Røyset3, S.J. Andersen2
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway, 3) Hydro Aluminium, Research and Technology Development, Romsdalsvegen, Norway
PL05
pdfPlenary
Giant Straining Process for Production of Ultrafine Structures and High Performance Aluminum
Z. Horita
Kyushu University, Japan
KL-01 (link to Mater. Trans.)
pdfKeynote
Aluminium in Innovative Light-weight Car Design
J. Hirsch1
1) Hydro Deutschland GmbH, Germany, 2) Hydro Aluminium, Norway
IL-02
pdfInvited
Alloy Development for Transportation in Sumitomo Light Metal
H. Yoshida
Sumitomo Light Metal Ind., Ltd., Japan
KL-04
pdfKeynote
Development of Aluminum Alloys and New Forming Technology for Automotive Parts
T. Aiura, T. Sakurai
Kobe Steel, Ltd., Japan
1A-01
pdf
Heat Treatment and Distortion – Challenge for Aircraft Industries
K. Schimanski, O. Karsten, A. von Hehl, H.W. Zoch
Stiftung Institut für Werkstofftechnik, Germany
IL-06
pdfInvited
Aluminium Alloy and Technology Developments for Advanced Gas Containment Applications
M.R. Clinch1, R. Daval2, W. Hepples3, N.J. H Holroyd1, K Johansen1, N Kalantzis2, M.J. Lawday4
1) Luxfer Gas Cylinders, USA, 2) Luxfer Gas Cylinders, France, 3) Luxfer Gas Cylinders, UK, 4) Luxfer European Alternative Fuel Centre, Italy
1A-02
pdf
Structure and Welding Technologies for SPB LNG Aluminum Tank
N. Oiwa, T. Iijima , A. Kida, S. Ohga
IHI Corporation, Japan
1A-03
pdf
Aluminium Self Piercing Riveted Connections: Effect of Pre-straining and Natural Aging on the Mechanical Behaviour
N-H. Hoang1, M. Langseth1, R. Porcaro1,2, A-G. Hanssen1,3
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway, 3) Impetus Afea AS, Norway
KL-02
pdfKeynote
On the Impact of Thermo-mechanical Processing on Microstructure and Texture and the Resultant Anisotropy of Aluminium Sheet
O. Engler
Hydro Aluminium Deutschland GmbH, Germany
IL-03
pdfInvited
Texture Formation in Aluminum Solid Solution Alloys by High-temperature Deformation
H. Fukutomi, K. Okayasu
Graduate School of Yokohama National University, Japan
1C-01
pdf
Influence of Solute Atoms on Thermal Stability of Fibrous Structure in 2024 Aluminum Alloy Extrusion
T. Minoda
Sumitomo Light Metal Industries, Ltd., Japan
1C-02
pdf
An Analysis of Roping in AA6016 Sheet by Through-thickness Texture Measurements and Numerical Simulations
A. Guillotin1,2, G. Guiglionda2, C. Maurice1, J.H. Driver1
1) Ecole Nationale Supérieure des Mines de Saint-Etienne, France, 2) Alcan Centre de Recherches de Voreppe, France
1C-03
pdf
Impact of the Precipitation State on Texture Evolution during Thermomechanical Processing of AA6016
C. Bollmann, S. Kovacs, G. Gottstein
RWTH Aachen University, Germany
1C-04
pdf
Behavior of Texture Formation during Uniaxial Compression of AA5052 and AA5182 Alloys at High Temperatures
H.M. Jeong, K. Okayasu, H. Fukutomi
Yokohama National University, Japan
1C-05
pdf
Same Area Observations on Recrystallization in Cold-Rolled Al-Mg-Si Alloy by means of EBSD
A. Yamamoto
University of Hyogo, Japan
1C-06
pdf
Evolution of Recrystallization Texture in Aluminum Alloy Sheets by Asymmetric-Warm-Rolling
Y. Suzuki, Y. Miki, Y. Ueno, K. Koyama, T. Komatsubara
Furukawa-Sky Aluminum Corp., Japan
1C-07
pdf
Texture and Microstructure Evolution of AA1100 during Accumulative Roll Bonding
J. Cho, H.W. Kim, C.Y. Lim
Korea Institute of Materials Science, Korea
KL-03
pdfKeynote
Selecting the Optimum Mg and Si Content for 6xxx Series Extrusion Alloys
M.J. Couper
Monash University, Australia
1D-01
pdf
Characterization of the Micro-Segregation in an AlMgMn Alloy Using an Innovative In-Situ Homogenization Process During Direct Chill Casting
S. Lee1, M. Gallerneault2, R. Wagstaff3
1) Novelis Ulsan Innovation Centre, Korea, 2)Novelis Global Technology Centre, Canada, 3)Novelis-Solatens, USA
IL-05
pdfInvited
Study of the Crack Sensitivity of 6xxx Aluminum Alloys
H. Nagaumi1, Y. Takeda2, T. Okane3, T. Umeda4
1) Suzhou Institute for Nonferrous Metals Research, China, 2) Nippon Light Metal Company Ltd., Japan, 3) National Institute of Advanced Industrial Science and Technology, Japan, 4) Chulalongkorn University, Thailand
1D-02
pdf
Mechanical Behavior of a 6061 Aluminum Alloy in the Semi-solid State Determined by Non-isothermal Tensile Tests during Solidification
E. Giraud1, M. Suéry1, M. Coret2
1) Université de Grenoble, France, 2) INSA Lyon, France
1D-03 (link to Mater. Trans.)
pdf
Grain Morphology of As-Cast Wrought Aluminium Alloys
M. Easton1,2, C. Davidson1,3, D. StJohn1,4
1) CAST Co-operative Research Centre, Australia, 2) Monash University, Australia, 3) CSIRO Process Science and Engineering, Australia, 4) The University of Queensland, Australia
1D-04
pdf
Automatic Control of Molten Metal Flow for Improving Casting Performance
J. Strömbeck1, T. Jarlsmark1, M. Terner1, J. Wilkins2, M. Suzuki3
1) Precimeter Control AB, Sweden, 2) Sentech Precimeter Inc., USA, 3) Ai Precimeter Co., Ltd., Japan
IL-09
pdfInvited
Mechanisms of Macro-Segregation in Direct-Chill Casting of Aluminum Alloys
D. Eskin
Delft University of Technology, Netherlands
IL-10
pdfInvited
Numerical Simulation and Experimental Research on the Cooling-controlled Technology for High Strength Aluminums Alloy Ingots
Y. Le, S. Guo, Y. Xu, G. Xue, K. Ma
Suzhou Institute for Nonferrous Metal Process Technology, China
IL-01
pdfInvited
Present Situation and Problems on Recycling of Aluminum Wrought Alloy Scrap Materials Recovered from End of Life Vehicle
M. Otaki
Furukawa Research Inc., Japan
IL-04
pdfInvited
A New Used Aluminum Beverage Can Recycling System
S. Yoshida1, H. Baba2
1) Mitsubishi Aluminum Co., Ltd., Japan, 2) Universal Can Corporation, Japan
1E-01
pdf
Aluminum Material Flow in Japan and Novel Processes Utilizing Secondary Alloys
O. Umezawa1, S. Kumai2
1) Yokohama National University, Japan, 2) Tokyo Institute of Technology, Japan
1E-02
pdf
Standard Aluminium Ingot Production From Aluminium Scraps
S. Prasertsook
Rajamangala University of Technology, Thailand
IL-07
pdfInvited
The Latest Refining Technologies of Segregation Process to Produce High Purity Aluminum
S. Mikubo
Kyushu Mitsui Aluminum Co., LTD., Japan
IL-08
pdfInvited
The Latest Melt Refining Technology in Furnace for Environmental Improvement
Y. Ohno
Pyrotek Japan Co., Ltd., Japan
1E-03
pdf
Solid State Recycling of Die-Cast Aluminum Alloy Chip Wastes by Compressive Torsion Processing
Y. Kume, T. Takahashi, M. Kobashi, N. Kanetake
Nagoya University, Japan
1E-04
pdf
Aluminum Scrap Recycling by Hot Extrusion without Melting Process
K. Pantke1, V. Güley2, N.B. Khalifa2, M. Heilmann1, D. Biermann1, A.E. Tekkaya2
1) Institute of Machining Technology, Germany, 2) Technische Universität Dortmund, Germany
1E-05
pdf
Combustion Foaming Process of Porous Al/Al3Ti Composite Made from Al Machined Chip
S. Suzumura, M. Kobashi, N. Kanetake
Nagoya University, Japan
KL-05
pdfKeynote
Effect of Homogenization Practice and Mn Content on the High Temperature Constitutive Behaviour of AA3xxx Aluminum Alloys
A.D. Kubiak1, W.J. Poole1 M.A. Wells2, N. Parson3
1) The University of British Columbia, Canada, 2) University of Waterloo, Canada, 3) Rio Tinto Alcan, Canada
2A-02
pdf
Homogenization Model for 7xxx Aluminum Alloys
W. Wang, R.T. Shuey
Alcoa Technical Center, USA
2A-03
pdf
"Universal" Laws for the Density of Disperoids after the Homogenisation Heat Treatment of Aluminium
A.L. Dons, (Y. Li)
SINTEF, Norway
2A-04
pdf
Modelling Homogenization Heat Treatment for AA3XXX Alloys
Q. Du1,W.J. Poole1, M.A. Wells2, N. Parson3
1) The University of British Columbia, Canada, 2) University of Waterloo, Canada, 3) Rio Tinto Alcan, Canada
KL-10
pdfKeynote
Trace Elements In Aluminium Alloys: Their Origin And Impact On Processability And Product Properties
T. Furu1, N. Telioui1, C. Behrens1, J. Hasenclever2, P. Schaffer1
1) Hydro Aluminium, Norway, 2) Hydro Aluminium Deutschland GmbH, Germany
2A-05
pdf
Effects of Trace Elements in Al-Fe-alloys on Microstructure and Properties of Rolled Products
J. Hasenclever
Hydro Aluminium Deutschland GmbH, Germany
2A-06
pdf
Yield Stress Development during Age-Hardening of AA6xxx: Comparison of Two Model Predictions with Experimental Findings
T. Brüggemann1, C. Bollmann1, V. Mohles1, G. Gottstein1, J. Hirsch2, O.R. Myhr3
1) RWTH-Aachen University, Germany, 2) Hydro Aluminium Deutschland GmbH, Germany, 3) Hydro Automotive Structures, Norway
2A-07
pdf
The Effect of Cold Deformation on Annealing Behavior of AA3xxx Alloys
P. Babaghorbani1, W.J. Poole1, M.A. Wells2, N.C. Parson3
1) The University of British Columbia, Canada, 2) University of Waterloo, Canada, 3) Rio Tinto Alcan, Canada
2A-08
pdf
Interactions between Precipitation and Annealing Phenomena during Non-isothermal Processing of an AA6xxx Alloy
P. Sepehrband1, X. Wang2, H. Jin3, S. Esmaeili1
1) University of Waterloo, Canada, 2) McMaster University, Canada, 3 Novelis Global Technology Centre, Canada
IL-17
pdfInvited
The Effect of Slip Mode on Brittle Intergranular Fracture of Al Alloys
S. Moutsos1, T. Pasang2, B.C. Muddle1, S.P. Lynch1,3
1) Monash University, Australia, 2) AUT University, New Zealand, 3) Defence Science and Technology Organisation, Australia
IL-18
pdfInvited
Development of Dislocation Structures during Cyclic Deformation of Aluminum Single Crystals
T. Fujii
Tokyo Institute of Technology, Japan
2A-09 (link to Mater. Trans.)
pdf
Formation of Dislocation Structure during Cyclic Deformation of Ultrafine-grained Aluminum at Low Temperatures
Y. Nakanishi, T. Fujii, S. Onaka, M. Kato
Tokyo Institute of Technology, Japan
2A-10
pdf
Study on Crack Branching of 2324-T39 Aluminum Alloy under Tension Dominated Spectrum Loading
T. Zhang, R. Bao, P. Liu, B. Fei
Beihang University, China
2A-11
pdf
Fatigue Mechanisms of Brazed Al-Mn Alloys Used in Heat Exchangers
A. Buteri1,2, J.Y. Buffière1, D. Fabrègue1, E. Perrin2, J. Rethoré1, P. Havet3
1) Universités de Lyon, France, 2) Alcan CRV, France, 3) Valeo Engine Cooling, France
2A-12
pdf
The Effect of Heat Treatment on Tensile, Fatigue and Fracture Resistance of ADC3, ADC10, and ADC12 Alloys
R.N. Lumley, D. Viano, J.R. Griffiths, C.J. Davidson
CSIRO Light Metals Flagship, Australia
IL-19
pdfInvited
Experimental and Numerical Study on the Fracture Behaviour of the Aluminium Alloy AA7075-T651
O.S. Hopperstad1, K.O. Pedersen2, T. Børvik1,3
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway, 3) Norwegian Defence Estates Agency, Norway
2A-13
pdf
Relating Plastic Properties to Microstructure by Linking FE Simulations with Microstructure Analysis
H. Weiland, M.E. Karabin, T.N. Rouns
Alcoa Technical Center, USA
IL-20
pdfInvited
Effect of Experimental Humidity on Fatigue Fracture of 6XXX-series Aluminum Alloys
K. Ichitani, K. Koyama
Furukawa-Sky Aluminum Corp., Japan
2A-14
pdf
Hydrogen Evolution during Fatigue Deformation in 6061 and 7075 Aluminum Alloys
K. Horikawa, H. Yamada, H. Kobayashi
Osaka University, Japan
2A-15
pdf
Behavior of Hydrogen Invaded Aluminum Alloys from Environment
G. Itoh1, M. Watanabe1, K. Kuroyanagi1, P. Zhao2
1) Ibaraki University, Japan, 2) Nippon Light Metal Co., Ltd., Japan
KL-06
pdfKeynote
The Kinetics of Natural Ageing in 6000 Alloys - a Multi-method Approach
J. Banhart1,3, C.S.T. Chang1, Z. Liang1, N. Wanderka1, M.D. H Lay2, A.J. Hill2
1) Helmholtz-Centre Berlin for Materials and Energy, Germany, 2) CSIRO, Australia, 3) Technische Universität, Germany
2B-01
pdf
Strengthening of 6xxx Series Sheet Alloys During Natural Ageing and Early-stage Artificial Ageing
P.A. Rometsch, L. Cao, B.C. Muddle
Monash University, Australia
2B-02
pdf
Effect of Natural Ageing on the Artificial Ageing Response of an Al-Mg-Si-Cu Alloy
L. Cao1, P.A. Rometsch1, H. Zhong1,2, Y. Mulji3, S.X. Gao1, B.C. Muddle1
1) Monash University, Australia, 2) Suzhou Nonferrous Metals Research Institute, CHALCO, China, 3) Polytech Nantes, France
2B-03
pdf
An Ageing Model for Al-Mg-Si Alloys Assuming the Needle-Shaped Morphology for Precipitates
A. Bahrami1,2, A. Miroux1, J. Sietsma2
1) Materials innovation institute (M2i), Netherlands, 2) Delft University of Technology, Netherlands
2B-04
pdf
Continuous Cooling Precipitation Diagrams Depending on the Composition of Aluminum-Magnesium-Silicon Alloys
B. Milkereit, C. Schick, O. Kessler
University of Rostock, Germany
IL-15
pdfInvited
Behind Structure and Relation of Precipitates in Al-Mg-Si and Related Alloys
S.J. Andersen1, C.D. Marioara1, M. Torsæter2, R. Bjørge2, F.J.H. Ehlers2, R. Holmestad2, O. Reiso3, J. Røyset3
1) SINTEF, Norway, 2) Norwegian University of Science and Technology, Norway, 3) Hydro Aluminium RDT, Norway
2B-05
pdf
Effect of Addition of Ag / Cu on Precipitation in Al-Mg-Si Alloys
K. Matsuda1, J. Nakamura1, H. Nishita1, T. Kawabata1, Y. Uetani2, T. Sato3, S. Ikeno1
1) University of Toyama, Japan, 2) Toyama Prefectural University, Japan, 3) Tokyo Institute of Technology, Japan
2B-06
pdf
Disordered Precipitates in an Al-Mg-Si-Cu-Ag Alloy
C.D. Marioara1, S.J. Andersen1, C.B. Boothroyd2, R. Holmestad3
1) SINTEF, Norway, 2) Technical University of Denmark, Denmark, 3) Norwegian University of Science and Technology, Norway
2B-07
pdf
Modification of Precipitate Microstructure in 6060 Al Alloy by Equal-Channel Angular Pressing
G. Sha1,2, X.Z. Liao2, R. Lapovok3, S.P. Ringer1,2
1) ARC Centre of Excellence for Design in Light Metals, Australia, 2) The University of Sydney, Australia, 3) Monash University, Australia
2B-08 (link to Mater. Trans.)
pdf
The Effect of Deformation on the Artificial Aging Response of an Al-Mg-Si Alloy
M. Kolar1, K.O. Pedersen2, S. Gulbrandsen-Dahl1,2, K. Teichmann1, K. Marthinsen1
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway
2B-09
pdf
Development of a New Aluminium-Lithium Alloy of Al-Cu-Mg-Li (Ag, Sc) System Intended for Manufacturing Sheets, Thin-Walled Sections and Forgings
B.V. Ovsyannikov, V.I. Popov
Kamensk Uralsky, Russia
2B-10
pdf
Effect of Addition of Sc and Mg on 2219 Al Alloy
S. Mondol, G. Praveen, S. Kumar, K. Chattopadhyay, S. Suwas
Indian Institute of Science, India
2B-11
pdf
Precipitation Hardening of Semi-Finished Micro Components Made of Al-2Sc
R. von Bargen, A. von Hehl, H.W. Zoch
IWT - Foundation Institute of Materials Science, Germany
2B-12
pdf
Effect of Scandium on Mechanical Properties of Aluminum Silicon Casting After Elevated Temperature Exposure
W. Prukkanon1, C. Limmaneevichitr2
1) University of the Thai Chamber of Commerce, Thailand, 2) King Mongkut's University of Technology Thonburi, Thailand
2B-13
pdf
Phase Field Modeling of Precipitation Kinetics in Al-Sc Alloys
H. Zapolsky, J. Boisse, M. Certain, R. Patte, N. Lecoq
University of Rouen, France
2B-14
pdf
The Effect of Bimodal Precipitate Distributions on the Strength-Elongation Combinations in Al-Cu Alloys
Y. Chen, M. Weyland, C.R. Hutchinson
Monash University, Australia
2B-15
pdf
Early Stages of Ω Phase Precipitation in Al-Cu-Mg-Ag Observed in situ with and without Applied Stress by Small Angle X-ray Scattering
F. De Geuser, F. Bley, A. Deschamps
SIMAP, France
2B-16
pdf
Effect of Cooling Method on the Microstructure and Properties of 7085 Aluminum Alloy during Non-isothermal Aging
L. Zhen1, M. Huang2, M. Liu2, W.Z. Shao1, J.T. Jiang1
1) Harbin Institute of Technology, China, 2) Beijing Institute of Aeronautical Materials, China
2B-17
pdf
Kinetic Study of Phase Transformation of Al-Zn-Mg-Cu Alloy during Quenching Process
Y. Xie, T. Zhou, P. Liu, C. Ma
Beijing University of Aeronautics and Astronautics, China
2B-18
pdf
The Effect of Fe, Mn and Trace Elements on Precipitation in Al-Mg-Si Alloy
Z.Q. Liang1, C.S.T. Chang1, N. Wanderka1, J. Banhart1, J. Hirsch2
1) Institute of Applied Material, Germany, 2) Hydro Aluminium Deutschland GmbH, Germany
2B-19
pdf
A TEM Study on α-Al(Mn,Fe)Si Dispersoids Precipitated in AA3003 Alloy
Y. Li1, T. Furu2, S. Kahl3, A. Olsen4
1) SINTEF, Norway, 2) Hydro Aluminium, Norway, 3) Sapa Technology, Sweden, 4) University of Oslo, Norway
IL-11
pdfInvited
Correlation between Texture and Formability of Aluminum Alloy Sheets: Crystal Plasticity Predictions
M. Kuroda, K. Yoshida
Yamagata University, Japan
IL-12
pdfInvited
Modeling Transients Related to Strain-path Changes
B. Holmedal1, O.S. Hopperstad1, T. Berstad1,2
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway
2C-01
pdf
Construction of Forming Limit Diagrams for AA 5754 and AA 2024 Aluminium Alloys
M. Turkoz1, O. Yigit2, M. Dilmec1, H.S. Halkaci1
1) Selcuk University, Turkey, 2) Karabuk University, Turkey
2C-02
pdf
Improvement in Metal Formability by Lowering Process Temperature Consciously
T. Uemura, M. Yoshimizu, H. Ohsawa
Hosei University, Japan
KL-09
pdfKeynote
Microstructurally Based Models for Shear Localization and Formability in Automotive Aluminum Alloys
X. Hu1, D.S. Wilkinson1, M. Jain1, J. Kang1, R.K. Mishra2
1) McMaster University, Canada, 2) General Motors Research and Development Center, USA
2C-03
pdf
The Strain Hardening Behaviour of Supersaturated Al-Cu Alloys
J. da Costa Teixeira1,2, Y.J.M. Bréchet3 , Y. Estrin1,4, C.R. Hutchinson1
1) Monash University, Australia, 2) Institut Jean Lamour, France, 3) SIMAP, France, 4) CSIRO, Australia
2C-04
pdf
Numerical Analysis of the Influence of Rolling Conditions on the Microstructure Evolution during Hot Rolling of Aluminium Alloy 5083 Using a Physical Model
P. Sherstnev1, C. Melzer2, C. Sommitsch3
1) Light Metals Technologies Ranshofen GmbH, Austria, 2) AMAG rolling GmbH, Austria, 3) Graz University of Technology, Austria
2C-05
pdf
Effect of Tool Angle on New Shearing Method of 1100 Aluminium Sheet
D. Lu1, M. Murata1, T. Kuboki1, Y. Jin2
1) The University of Electro-Communications, Japan, 2) AMADA Co., Ltd., Japan
2C-06
pdf
Lubrication Performance of Palm Olein in Cold Extrusion of Aluminum Alloy Using Tool with Pits Arrays Surface
S. Kamitani1, K. Nakanishi1, S. Syahrullail2, S. Simotabira1
1) Kagoshima University, Japan, 2) Universiti Teknologi Malaysia, Malaysia
2C-07
pdf
Evaluation of RBD Palm Stearin as an Extrusion Lubricant of Aluminum Alloy 5083
S. Syahrullail1, C.I. Tiong1, S. Kamitani2, K. Nakanishi2
1) Universiti Teknologi Malaysia, Malaysia, 2) Kagoshima University, Japan
2C-08
pdf
Mathematical Modelling of the Extrusion of AA3xxx Aluminum Alloys
Y. Mahmoodkhani1, M.A. Wells1, N. Parson2, Y. Geng3, W.J. Poole3
1) University of Waterloo, Canada, 2) Rio Tinto Alcan, Canada, 3) University of British Columbia, Canada
2C-09
pdf
Industrial Extrusion and Characterisation of Alloy AA2013
A.J. den Bakker1, T. Minoda2, L. 't Hoen-Velterop3
1) Nedal Aluminium B. V., Netherlands, 2) Sumitomo Light Metal Industries Ltd, Japan, 3) NLR, Netherlands
2C-10
pdf
Deliberation of CAE Model for Extruded Rectangular Hollow Products
N. Takatsuji1, K. Kuroda1 (speaker), S. Murakami2, T. Inagaki2
1) University of Toyama, Japan, 2) Aisin Keikinzoku Co., Ltd., Japan
2C-11
pdf
FEM Codes Benchmark for Aluminum Extrusion Process Analysis
L. Donati1, N. Ben Khalifa2, L. Tomesani1, A.E. Tekkaya2
1) University of Bologna, Italy, 2) Technische Universität Dortmund, Germany
2C-12
pdf
Deformation Behavior of Joining Tube and Holed Rib by Extrusion
T. Moroi, T. Kuboki, M. Murata
The University of Electro-Communications, Japan
2C-13
pdf
Bendability and Fracture Behaviour of Heat-treatable Extruded Aluminium Alloys
I. Westermann, K.E. Snilsberg, B. Holmedal, O.S. Hopperstad, K. Marthinsen
Norwegian University of Science and Technology, Norway
2C-14
pdf
Internal Threads for Thin-Walled Sections
T. Engbert, D. Biermann, A. Zabel
Technische Universität Dortmund, Germany
2C-15
pdf
The Effect of Crystallographic Texture on the Wrap Bendability in AA5754-O Temper Sheet Alloy
H. Jin, Y. Shi, A.K. Gupta
Novelis Global Technology Centre, Canada
2C-16
pdf
Processing Limit in V-bending
T. Shibata1, Y. Jin1, J. Koyama1, T. Kuboki2, M. Murata2
1) AMADA Co., Ltd., Japan, 2) The University of Electro-Communications, Japan
2C-17
pdf
Deformation by V-bending of Thick Plate Metal 5083
N. Khamt1, M. Murata1, T. Kuboki1, T. Shibata2, Y. Jin2
1) The University of Electro-Communications, Japan, 2) AMADA Co., Ltd., Japan
2C-18
pdf
Deformation Behavior in Three-point Bending of Aluminum Alloy Honeycomb Structures
H. Hino1, Y. Takayama2, H. Kato2, H. Watanabe2
1) Teikyo University, Japan, 2) Utsunomiya University, Japan
KL-07
pdfKeynote
Sono-Solidification in Hypereutectic Al-Si Alloy
Y. Tsunekawa, K. Taga, Y. Fukui, M. Okumiya
Toyota Technological Institute, Japan
IL-13
pdfInvited
Ultrasonic Processing of Aluminum Alloys for Grain Refining
G.I. Eskin1, D.G. Eskin2
1) All-Russia Institute of Light Alloys, Russia, 2) Materials innovation institute, Netherlands
IL-14
pdfInvited
A New Approach to Producing AA7055 Aluminum Alloy Slab Ingots
J. Cui1, H. Zhang1, H. Nagaumi2
1) Northeastern University, China, 2) Suzhou Institute for Nonferrous Metals Research, China
2D-01
pdf
Refinement of Primary Silicon in Casting Aluminum Alloys via Application of Ultrasonic Vibrations to DC Process
S. Komarov, Y. Ishiwata, K. Oda
Nippon Light Metal Company, Japan
2D-02 (link to Mater. Trans.)
pdf
Refinement Factors of Mechanical Vibrations on Microstructure of Al-7mass%Si Alloys
T. Tamura1, T Matsuki2, K Miwa1
1) National Institute of Advanced Industrial Science and Technology, Japan, 2) Yamagata Research Institute of Technology, Japan
2D-03 (link to Mater. Trans.)
pdf
Microstructural Change during Solution Heat Treatment and Its Effect on Tear Toughness in A356 Cast Alloys
Y. Harada, S. Tamura, S. Kumai
Tokyo Institute of Technology, Japan
2D-04
pdf
Aging Characteristics, Dimensional Stability and Assessment of High-Temperature Performance of Cast Al-Si Alloy for Powertrain Applications
W. Kasprzak1, Z. Deng2, J. Powell3, M. Niewczas3
1) CANMET Materials Technology Laboratory, Canada, 2) McGill University, Canada, 3) McMaster University, Canada
2D-05
pdf
Effect of Cooling Rate on Microstructure and Mechanical Properties in Al-Si Alloys
S.B. Kang1, J. Zhang1,2, S. Wang1, J. Cho1, V.U. Stetsenko3
1) Korea Institute of Materials Science, Korea, 2) Shandong University, China, 3) Institute of Technology of Metals, Belarus
2D-06
pdf
Recent Developments in Through-Process Modelling of Aluminium Die-Castings
C. Dørum1,2, H.I. Laukli2,3, O.S. Hopperstad2,4, T. Berstad1,2, (P.L. Schaffer3)
1) SINTEF, Norway, 2) Norwegian University of Science and Technology, Norway, 3) Norsk Hydro ASA, Norway, 4) Norwegian University of Science and Technology, Norway
2D-07
pdf
The Skin Effect in High Pressure Die Casting Al Alloys
K. Vanna Yang1, A.V. Nagasekhar1, R.N. Lumley2, C.H. Caceres1
1) The University of Queensland, Australia, 2) CSIRO, Australia
2D-08 (link to Mater. Trans.)
pdf
High Speed Twin-roll Casting of Al-Si Based Alloys
M.S. Kim, S. Kumai
Tokyo Institute of Technology, Japan
2D-09
pdf
Effect of Mn Content on Microstructure of Twin Roll Cast Al-Mg-Mn Alloys
H.W. Kim, J. Cho, C.Y. Lim, S.B. Kang
Korea Institute of Materials Science, Korea
2D-10
pdf
Casting of Three Layers of Aluminum Alloy Clad Strip Using a Vertical Type Tandem Twin Roll Caster
R. Nakamura1, T. Haga1, S. Kumai2, H. Watari3
1) Osaka Institute of Technology, Japan, 2) Tokyo Institute of Technology, Japan, 3) Gunma University, Japan
2D-11
pdf
Casting of Three Layers of Aluminum Alloy Clad Strip Using a Different Diameter Twin Roll Caster
T. Yamabayashi1, T. Haga1, S. Kumai2, H. Watari3
1) Osaka Institute of Technology, Japan, 2) Tokyo Institute of Technology, Japan, 3) Gunma University, Japan
2D-12
pdf
Microstructures and Properties of Al-Mn Aluminum Alloys Fabricated by a Twin Belt Caster
P. Zhao, T. Hirayama, T. Anami
Nippon Light Metal Company, Ltd. NRDC., Japan
2D-13
pdf
Melt Conditioned Twin Roll Casting Process for Aluminium Alloys
S. Kumar, N. Hari Babu, G. Scamans, Z. Fan
Brunel University, UK
2D-14
pdf
On the Development of a Cold Cracking Criterion for DC-Casting of High Strength Aluminum Alloys
M. Lalpoor1, D.G. Eskin1,2, L. Katgerman2
1) Materials innovation institute, Netherlands, 2) Delft University of Technology, Netherlands
2D-15
pdf
Removal of Iron from Commercial Aluminum by Electroslag Refining
C. Chen, J. Wang, H. Liu, J. Gao, B. Sun
Shanghai Jiao Tong University, China
2D-16 (link to Mater. Trans.)
pdf
Effect of Mg on Fluidity and Microstructure of Al-12%B4C Composites
Z. Zhang, K. Fortin, A. Charette, X.G. Chen
University of Quebec at Chicoutimi, Canada
2D-17
pdf
The Effect of Cu on Feeding Characteristics of Aluminum Casting Alloys
J.I. Cho1, C.Y. Jeong2, Y.C. Kim1, S.W. Choi1, C.S. Kang1
1) Korea Institute of Industrial Technology, Korea, 2) Dongguk University, Korea
2D-18
pdf
Gate Microstructure in an AlSi9MgMn High-Pressure Die Casting
J. Gleeson1, C.M. Gourlay1, P.L. Schaffer2, H.I. Laukli2
1) Imperial College, UK, 2) Hydro Aluminium, Norway
KL-08
pdfKeynote
Appearance Modeling of Multilayered Nano-structured Metal Oxides Formed in Interference Coloured Anodised Aluminium
I. De Graeve1, P. Laha1, D. Verwimp2, R. Furneaux3, H. Terryn1
1) Vrije Universiteit Brussel, Belgium, 2) United Anodisers, Belgium, 3) TSC Surface Critical Products Ltd., UK
2E-01
pdf
Electron Beam Liquid Phase Surface Technologies for Components Made from High-Loaded Aluminium Materials
A. Buchwalder1, R. Zenker1,2
1) TU Bergakademie Freiberg, Germany, 2) Zenker Consult, Germany
2E-02
pdf
Hydrophilic Coating with Water Glass and Sodium Poly-acrylate on the Aluminum Sheet with Chromate-phosphate Conversion Coating
Y. Ota, T. Shimizu
Kobe Steel, Ltd., Japan
2E-03
pdf
Corrosion Resistance Improvement of Aluminum by Hydrophobic Anodic Oxide Film
M. Zheng, H. Jha, M. Sakairi
Hokkaido University, Japan
2E-04
pdf
Effect of Composition, Grain Size and Texture on the Etching Response of 6xxx Alloys
M.U.F. Chandia, Ø. Bauger, T. Furu
Hydro Aluminium, Norway
IL-16
pdfInvited
Aluminum Alloys in a Hyperspace ? – An Exotic View of Quaicrystals
E. Abe
University of Tokyo, Japan
2E-05
pdf
Characterization of Al85Ni11Y4 Melt Spun Glass
M.D.H. Lay, A.J. Hill, M.A. Gibson, T.J. Bastow
CSIRO, Australia
2E-06
pdf
Nanocrystallization in Al-based Metallic Glasses
D.V. Louzguine-Luzgin, G. Xie, A. Inoue
Tohoku University, Japan
2E-07
pdf
Mechanical Properties, Microstructure and Formability of Aluminum Alloys with Dispersed Nanoscale Quasicrystalline Particles
M. Fujita1, H. Kimura2, A. Inoue2
1) Honda R&D Co., Ltd., Japan, 2) Tohoku University, Japan
2E-08
pdf
Structure and Properties of Nanocomposites Prepared from Ball Milled 7475 Aluminum Alloy with ZrO2 Powders
J. Dutkiewicz1, L. Lityńska-Dobrzyńska1, W. Maziarz1 A. Kukuła1, A. Kanciruk2
1) Institute of Metallurgy and Materials Science of the Polish Academy of Sciences, Poland, 2) Institute of Strata Mechanics of the Polish Academy of Sciences, Poland
2E-09
pdf
Effect of Stirring Time and Processing Temperature on the Size Distribution of Al6061-Al2O3 Powder Mixture Produced by In Situ Powder Metallurgy (IPM) Method
F. Akhlaghi, S. Pour-Naderi
University of Tehran, Iran
2E-10
pdf
Properties of "MAXUSTM" Aluminum Matrix Composite
Y. Kamimura1, K. Sanada1, M. Sonoda2
1) Nippon Light Metal Company, Ltd., Japan, 2) Nikkeikin Aluminium Core Technology Company, Ltd., Japan
2E-11
pdf
Fabrication of (Al2O3-IMC)p/Al Composite Materials by In-situ Reaction Using MA Processed Al/MO Powders
H.B. Lee1, H. Tezuka1, E. Kobayashi1, T. Sato1, K.D. Woo2
1) Tokyo Institute of Technology, Japan, 2) Chonbuk National University, Korea
2E-12
pdf
Effect of Powder Blending Ratio on the Microstructure of AlN Matrix Composite Fabricated by Reactive Infiltration
S. Aoyama, M. Kobashi, N. Kanetake
Nagoya University, Japan
2E-13
pdf
Effect of Nd Content on the Mechanical Properties of Grf/Al Composite
X. Wang1, G. Chen1, G. Wu1, D. Jiang1, J. Liu2
1) Harbin Institute of Technology, China, 2) Harbin Bureau of Quality and Technical Supervision, China
2E-14
pdf
Effect of Indium Addition on Matrix of MgB2 / Al Composite Materials
M. Mizutani1, K. Matsuda1, K. Nishimura1, T. Kawabata1, Y. Hishinuma2, S. Aoyama3, S. Ikeno1
1) University of Toyama, Japan, 2) National Institute for Fusion Science, Japan, 3) Nikkei Niigata, Japan
2E-15
pdf
An Al Alloy-Ti Microfilament Composite Manufactured by Co-spray Forming and Accumulative Deformation Processing
A.J. Kelly1, J. Mi1, G.V. Sinha2, P. Krug2, F. Crosa3, F. Audebert3, P.S. Grant1
1) University of Oxford, UK, 2) PEAK Werkstoff GmbH, Germany, 3) University of Buenos Aires, Argentina
2E-16
pdf
Combined Process of Ultrasonic Welding and Precipitation Hardening of Aluminium Alloy 2024/Carbon Fibre Reinforced Composites Structures
F. Balle, G. Wagner, D. Eifler
University of Kaiserslautern, Germany
2E-17
pdf
Effect of High Temperature Diffusion on Microstructure and Mechanical Performance of Si/1199Al Composites
Z. Xiu, G. Chen, X. Wang, W. Yang, X. Wang, G. Wu
Harbin Institute of Technology, China
2E-18 (link to Mater. Trans.)
pdf
Preparation of Unidirectional Carbon Fiber Preform for Cf/Al Composites
M. Lee, Y. Choi, K. Sugio, K. Matsugi, G. Sasaki
Hiroshima University, Japan
2E-19
pdf
Effect of Microstructure on Thermal Properties for VGCF/ Aluminum Composites Fabricated by Spark Sintering Process
G. Sasaki, Z. Xu, K. Sugio, H. Fukushima, Y.B. Choi, K. Matsugi
Hiroshima University, Japan
3A-01
pdf
Effect of Particles of the Eutectic Phases on the Structure of Superplastic Aluminum Alloys
V.K. Portnoy, A.V. Mihaylovskaya, M.A. Ryazantseva, V.S. Levchenko, S.M. Soloviev
National University of Science and Technology "MISIS", Russia
3A-02
pdf
Fabrication of Superplastic Aluminum Sheets by Equal-channel Angular Pressing Followed by Isothermal Rolling
A. Mogucheva, D. Tagirov, R. Kaibyshev
Belgorod State University, Russia
3A-03
pdf
Influence of Scandium Additions and Various Alloy Sheet Thickness on the Superplastic Properties of Al-Mg and Al-Mg-Mn Alloys
A. Smolej1, B. Skaza1, E. SlaÄek2
1) University of Ljubljana, Slovenia, 2) Slovenska Bistrica, Slovenia
3A-04
pdf
Examination of the Impact of Additives Zirconium on the Heat Resistance of Conductive Aluminum Alloys
T. Knych, A. Mamala, M. Piwowarska, P. Uliasz
AGH University of Science and Technology, Poland
3A-05
pdf
Evolution of Grain Structure During Superplastic Deformation of an Al-Zn-Mg-Cu-Zr Alloy Containing Sc
A.K. Mukhopadhyay1, A. Kumar1, K.S. Prasad1, S. Raveendra2, I. Samajdar2
1) Defence Metallurgical Research Laboratory, India, 2) Indian Institute of Technology, India
IL-25
pdfInvited
Laser Welding and Hybrid Welding of Aluminium Alloys
S. Katayama, Y. Kawahito, M. Mizutani
Osaka University, Japan
IL-28
pdfInvited
Novel Brazing Technologies for Hybrid Aluminum Structures
W. Tillmann, L. Wojarski, C. Liu
TU Dortmund, Germany
3A-06
pdf
Effect of Mechanical Arc Oscillation on Partially Melted Zone (PMZ) Microstructure and Properties of 2014 T6 TIG Welds
N.S. Biradar, S. Mishra, R. Raman
IIT Bombay, India
3A-07
pdf
Effects of TIG Welding Parameters on Dissimilar Metals Welding between Mild Steel and 5052 Aluminum Alloy
R. Borrisutthekul, P. Mitsomwang, S. Rattanachan
Suranaree University of Technology, Thailand
3A-08
pdf
Ultrasonic Welding of Aluminum Wires with Large Cross Sections
G. Wagner, F. Balle, D. Eifler
University of Kaiserslautern, Germany
3A-09 (link to Mater. Trans.)
pdf
High-speed Solid-state Welding of 2xxx Aluminum Alloy Studs to 5xxx Aluminum Alloy Plates
S. Kumai, K. Hayashida, M. Watanabe
Tokyo Institute of Technology, Japan
3A-10 (link to Mater. Trans.)
pdf
Metal Jet Emission and Wavy Interface Formation in High-speed Impact Welding
S. Kakizaki, M. Watanabe, S. Kumai
Tokyo Institute of Technology, Japan
3A-11 (link to Mater. Trans.)
pdf
A Study on Joining Al/Steel pipe Using a Magnetic Pulse Welding
J.Y. Shim1, I.S. Kim2, M.J. Kang1, I.J. Kim1, K.J. Lee1, B.Y. Kang1
1) KITECH, Korea, 2) Mokpo National University, Korea
3A-12
pdf
Nano-scale Evaluation of Interfacial Reaction Layers in Aluminum and Steel Dissimilar Metals Joints with Alloying Elements using Nanoindentation Technique
T. Ogura, K. Ueda, Y. Saito, A. Hirose
Osaka University, Japan
3A-13
pdf
Effects of Aluminium Alloy Surface Preparation in TIG Dissimilar Metals Welding between Mild Steel and 5052 Aluminium Alloy
C. Pothong, P. Mitsomwang, T. Udomphol, R. Borrisutthekul
Suranaree University of Technology, Thailand
3A-14
pdf
Effects of Silicon Alloying on Mechanical Properties of RSW Joints between Al-Mg-Si Alloys and High Tensile Strength Steels
K. Matsumoto, W. Urushihara, M. Takeda, J. Katoh
Kobe Steel, Ltd., Japan
3A-15 (link to Mater. Trans.)
pdf
Microstructure and Mechanical Properties of 5000 System Al Stud Joints with Zn Insert Using Friction Welding
T. Nishida1, T. Ogura1, M. Fujimoto2, A. Hirose1
1) Osaka university, Japan, 2) Kawasaki Heavy Industries, Ltd., Japan
3A-16
pdf
Incipient Melting and Corrosion Properties of Friction Stir Welded AA2024-T3 Joints
U. Alfaro-Mercado1, G. Biallas2
1) Institute of Materials Research, Germany, 2) Institut für Werkstoffkunde und Schweißtechnik, Germany
3A-17 (link to Mater. Trans.)
pdf
Growth Manner of Intermetallic Compound Layer Produced at Welding Interface of Friction Stir Spot Welded Al/Steel Lap Joint
M. Watanabe, K. Feng, Y. Nakamura, S. Kumai
Tokyo Institute of Technology, Japan
3A-18 (link to Mater. Trans.)
pdf
Evaluation of the Process-Properties Relationship of Al 2024 Friction Spot Welds
S.T. Amancio-Filho1, A.P.C. Camillo2, L. Bergmann1, J.F. dos Santos1, S.E. Kury2, N.G.A. Machado2
1) GKSS Forschungszentrum GmbH, Germany, 2) Federal University of Sao Carlos (UFSCar), Brazil
3A-19
pdf
An Experimental Investigation of the Heat Affected Zone (HAZ) Properties of AA6060 and AA7046 Following Different Heat Treatment Schedules
A. Alisibramulisi1, O.R. Myhr1,2, O.G. Lademo3,1, P.K. Larsen1
1) Norwegian University of Science and Technology, Norway, 2) Hydro Aluminium, Norway, 3) SINTEF, Norway
3A-20
pdf
Microstructures and Mechanical Properties of 7075 Aluminum Alloy by Repetition Friction Stir Processing
D. Nakama, K. Katoh
Nihon University, Japan
3B-01
pdf
Microstructure and Microhardness of an Al-Zr-Ti-Fe Alloy
T. Maeshima, H. Matsuoka
Toyota Central R&D Labs., Inc. Japan
3B-02
pdf
Precipitation Kinetics in Age Hardening Al-Alloys by Dilatometry and Differential Scanning Calorimetry
M. Kumar1, C. Poletti1, C. Collet2, H.P. Degischer1
1) Vienna University of Technology, Austria, 2) University of Bordeaux 1, France
3B-03
pdf
Dynamic Precipitation During Cyclic Deformation in Under Aged Al-4Cu Containing θ′ (Al2Cu) Precipitates
W.Z. Han1, A. Vinogradov2, C.R. Hutchinson1
1) Monash University, Australia, 2) Osaka City University, Japan
3B-04
pdf
Microstructure of Two Overaged Al-Mg-Si-Cu Alloys
J. Holmestad1,2, C.D. Marioara3, S.J. Andersen3, R. Holmestad1
1) NTNU, Norway, 2) Hydro Aluminium, Research and Technology Development, Norway, 3) SINTEF, Norway
3B-05
pdf
The Effect of Deformation on the Precipitation Behaviour of an AlMgSi Alloy A HRTEM Study
K. Teichmann1, C.D. Marioara2, K.O. Pedersen2, S. Gulbrandsen-Dahl1,3, M. Kolar1, S.J. Andersen2, K. Marthinsen1
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway, 3) Raufoss Technology & Industrial Management, Norway
IL-26
pdfInvited
GP Zone Facets in Al-4, 15 & 30 wt% Ag Alloys
K. Matsuda1, H. Daicho1, G.J. Shiflet2, S. Ikeno1
1) Toyama University, Japan, 2) University of Virginia, USA
3B-06
pdf
The Relationship between Precipitation Behavior and Alloy Composition in an Al-Mg-Si Alloy
M. Takeda1, M. Oguri1, T. Kikuchi1, K. Uesugi1, K. Fukui1, M. Mitome2
1) Yokohama National University, Japan, 2) National Institute for Materials Science, Japan
3B-07
pdf
Effects of Cu Addition on Aging Behavior of Al-0. 5%Si-0. 3%Mg Alloy
M. Ando, Y. Suzuki
Furukawa-sky Aluminum Corp., Japan
3B-08 (link to Mater. Trans.)
pdf
Effects of Cu Addition on Behavior of Nanoclusters during Multi-step Aging in Al-Mg-Si Alloys
J.H. Kim, E. Kobayashi, T. Sato
Tokyo Institute of Technology, Japan
3B-09
pdf
The Effect of Ag Addition on Transition of Crystal Structure for β'-phase in Al-Mg-Si Alloy
J. Nakamura1, K. Matsuda1, T. Sato2, C.D. Marioara3, S.J. Andersen3, R. Holmestad4, S. Ikeno1
1) University of Toyama, Japan, 2) Tokyo Institute of Technology, Japan, 3) SINTEF, Norway, 4) Norwegian University of Science and Technology, Norway
3B-10
pdf
Natural Ageing of Al-Mg-Si Alloys
C.S.T. Chang, Z.Q. Liang, J. Banhart
Institute of Applied Materials, Germany
3B-11
pdf
Effect of Amount of Pre-strain on Bake-hardening Response of an Al-Mg-Si Alloy
T. Masuda1,2, Y. Takaki2, S. Hirosawa1
1) Yokohama National University, Japan, 2) Kobe Steel, Ltd., Japan
3B-12
pdf
Effects of Natural Aging and Cold Work on the Strength of 2013 Aluminum Alloy
S. Iwamura, Y. Ozeki, H. Yoshida
Sumitomo Light Metal Industries, Ltd., Japan
3B-13
pdf
Thermo-kinetic Computer Simulation of Differential Scanning Calorimetry Curves of AlMgSi Alloys
A. Falahati, E. Povoden-Karadeniz, P. Lang, P. Warczok, E. Kozeschnik
Vienna University of Technology, Austria
3B-14 (link to Mater. Trans.)
pdf
Microstructural Change Resulting from Aging Treatment of Ultrafine Grained Al-Si Alloy Fabricated by ARB
K. Nakagawa1, T. Kanadani1, N. Tsuji2, D. Terada2, T. Masui3, Y. Sato1
1) Okayama University of Science, Japan, 2) Kyoto University, Japan, 3) Osaka University, Japan
3B-15
pdf
The Influence of Cu Content on the Aging Behavior of Al2O3P/Al-Cu-Mg Composite
S. Feng1, Q. Guo1, R. Jiang1,2, L. Jiang1, G. Wu1
1) Harbin Institute of Technology, China, 2) Hebei University of engineering, China
3B-16
pdf
Heat Treatment of Aluminum Castings Combined with Hot Isostatic Pressing
M. Brummer, H. Hoffmann, E. Werner
Technische Universität München, Germany
3B-17
pdf
Effect of Solution Treatment on Microstructure and Mechanical Properties of Thick Plate Aluminium Alloy 7150
D. Xu1, P.A. Rometsch1, H. Chen2, S.X. Gao1, B.C. Muddle1
1) Monash University, Australia, 2) Southwest Aluminium Co. Ltd., China
3B-18
pdf
Electrical Resistivity and Strength of Cold Rolled Sheets of Aluminium Alloys Containing up to 0. 64 wt. % Zr
N.A. Belov1, A.N. Alabin1, A.Y. Prokhorov2
1) National Research and Technological University "MIS&A", Russia, 2) OAO "Kirskabel", Russia
3B-19
pdf
An Effect of Deformation after Quenching and Heat Treatment on Mechanical and Corrosion Properties of Al-Mg-Si-Cu-Zn Alloy
N.I. Kolobnev, V.V. Makhsidov, S.V. Samokhvalov, S.V. Sbitneva, V.I. Popov, M. G Kurs
FSUE "All-Russian Institute of Aviation Materials", Russia
3B-20
pdf
Influence of Precipitate Morphology on Hardness and Electrical Conductivity of Heat-treatable Aluminum Alloys
S.P. Yuan1, G. Liu1 , R.H. Wang1 , G.J. Zhang1, X. Pu1, J. Sun1, K.H. Chen2
1) Xi'an Jiaotong University, China, 2) The University of Southern Central China, China
3B-21
pdf
Influence of Homogenizing and Ageing Practices on Microstructure and Dynamic Compression of Crash Relevant Al-Alloy Extrusions
I. Koumarioti1, S. Ping2, A. Vazdirvanidis2, G. Pantazopoulos2, S. Zormalia2
1) ETEM S. A., Greece, 2) ELKEME Hellenic Research Centre for Metals S. A., Greece
ICAA11
pdf
Effect of Plastic Deformation on Age Hardening Response of Al-Mg-Si Alloy
T. Masuda, Y. Takaki, T. Sakurai
Kobe Steel, Ltd, Japan
KL-11
pdfKeynote
Recrystallization or Not ?: Formation Mechanism of Ultrafine Grains in Aluminum through Severe Plastic Deformation and Subsequent Annealing
N. Tsuji1, N. Kamikawa2
1) Kyoto University, Japan, 2) Tohoku University, Japan
IL-22
pdfInvited
Powder Consolidation by Severe Plastic Deformation and its Applications in Processing Ultrafine and Nanostructured Aluminium and Composites
K. Xia, W. Xu, X. Wu, S. Goussous, E. Lui, Y.S. Wu
University of Melbourne, Australia
3C-01
pdf
Effects of Strain Increment on Grain Refining in Pure Aluminum during Room Temperature Multiple Directional Forging
M. Suzuki1, M. Kojima2, P.K. Maruyama1
1) Tohoku University, Japan, 2) JX Nippon Oil & Energy, Japan
3C-02
pdf
The Effect of Precipitation on the Recovery and Recrystallization Behaviour of AA6111
J. Go1,2, M. Militzer1, W. Poole1
1) The University of British Columbia, Canada, 2) Corus Research, Development and Technology, Netherlands
3C-03
pdf
Integrating Stress Enhanced Recovery into a Work Hardening Model
S Bhaumik, V Mohles, G Gottstein
RWTH Aachen University, Germany
IL-27
pdfInvited
The Effect of Non-Linear Deformation History on Microstructure and Recrystallization in Hot Worked Aluminium
B.P. Wynne, M. Lopez-Pedrosa, O. Hernandez-Silva, W.M. Rainforth
The University of Sheffield, UK
3C-04
pdf
Processing Aluminum and Aluminum Alloys by Continuous High-Pressure Torsion
K. Edalati, Z. Horita
Kyushu University, Japan
3C-05
pdf
Analysis of Yield Strength for Isothermal Aged Al-Mg-Si Alloys
K. Takata1, J. Takahashi1, M. Saga1, K. Ushioda1, K. Ikeda2, M. Mitsuhara2, K. Terada2, S. Hata2, H. Nakashima2, K. Kaneko2, M. Kikuchi2
1) Nippon Steel Corporation, Japan, 2) Kyushu University, Japan
3C-06
pdf
The Effect of Transition Elements on Work Hardening of Al-4.8%Mg Alloy Extrusions
T. Shikama, S. Yoshihara
Kobe Steel, Ltd, Japan
3C-07
pdf
Strengthening Al-Mg-Si Alloys with Ultra Fine Sub-grain Structure
T. Mukai, Y. Osawa, A. Singh, T. Inoue
National Institute for Materials Science, Japan
KL-13
pdfKeynote
Evolution of Earing during Drawing and Ironing Processes
J.W. Yoon1,2, R.E. Dick1, F. Barlat3
1) Alcoa Technical Center, USA, 2) Swinburne University of Technology, Australia, 3) POSTECH, Korea
3C-08
pdf
Improvement in Deep Drawability by Texture Control for Rolled and Annealed Aluminum Alloy Sheets
H. Inoue, T. Takasugi
Osaka Prefecture University, Japan
3C-09
pdf
Formability of AA5083 Aluminum Alloy Sheets Produced by Controlled Rolling
H. Tanaka, M. Asano
Sumitomo Light Metal Ind. Ltd., Japan
3C-10
pdf
Texture, Microstructure and Mechanical Properties of Asymmetrically Rolled AA6082 Aluminum Alloy
S. Farè1, M. Vedani1, G. Angella2, G. Garces3
1) Politecnico di Milano, Italy, 2) Ieni, CNR, Italy, 3) CENIM, Spain
3C-11
pdf
Texture and Mechanical Properties of Al-Mg-Si Series Aluminum Alloy Sheets Manufactured by Cross-roll Rolling Method
K.J. Lee1, J.Y. Jeon1, H.T. Son1, K.D. Woo2
1) Korea Institute of Industrial Technology, Korea, 2) Chonbuk National University, Korea
3C-12
pdf
Improvement of Deep Drawability of Al-Mg-Si Alloy Sheets for Automotive Panel by Asymmetric Warm Rolling
Y. Miki, O. Noguchi, Y. Ueno, Y. Suzuki, K. Koyama, T. Komatsubara
Furukawa-Sky Aluminum Corporation, Japan
IL-31
pdfInvited
Hot and Warm Deformation of AA5182 Sheet Materials: Ductility and Microstructure Evolution
E.M. Taleff1, K. Takata2, K. Ichitani3
1) The University of Texas at Austin, USA, 2) Nippon Steel Corporation, Japan, 3) Furukawa-Sky Aluminum Corporation, Japan
3C-13
pdf
Towards High Strength 7xxx Aluminium Sheet Components Through Warm Forming
N. Sotirov1, P. Simon1, T. Waltenberger1, D. Uffelmann2, C. Melzer2
1) LKR Leichtmetallkompetenzzentrum Ranshofen GmbH, Austria, 2) Austria Metall AG, Austria
3C-14
pdf
Mechanical and Forming Properties of AA6xxx Sheet from Room to Warm Temperatures
A. Miroux1, M. Ghosh1,2, S. Kurukuri1,3, L. Kestens2, A.H. van den Boogaard3
1) Materials innovation institute, Netherlands, 2) Delft University of Technology, Netherlands, 3) University of Twente, Netherlands
3C-15
pdf
Development of Press Forming Technologies of Aluminum Alloy Sheets by Servo Press
Y. Ueno, K. Koyama, T. Komatsubara, Y. Bekki
Furukawa-Sky Aluminum Corp., Japan
3C-16
pdf
Microembossing of Ultra Fine-Grained Al
X.G. Qiao, N. Gao, Z. Moktadir, M. Kraft, M.J. Starink
University of Southampton, UK
3C-17
pdf
Optimized Processing for Distortion Control in Milling of Al-Zn-Mg Alloys
O. Karsten, C. Grote, K. Schimanski, A. von Hehl, H.W. Zoch
IWT - Foundation Institute of Materials Science, Germany
IL-21
pdfInvited
In-situ X-ray Video Microscopy Studies of Al-Si Eutectic Solidification
R.H. Mathiesen1, L. Arnberg1, Y. Li2, A.K. Dahle3
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway, 3) University of Queensland, Australia
3D-01
pdf
Nucleation and Growth Dynamics of the α-Al / β-Al5FeSi Eutectic in a Complex Al-Si-Cu-Fe Alloy
S. Terzi1, J.A. Taylor1, Y.H. Cho1, L. Salvo2, M. Suéry2, E. Boller3, A.K. Dahle1
1) The University of Queensland, Australia, 2) Université de Grenoble, France, 3) ESRF, France
3D-02
pdf
Characterisation of the Influence of Minor Elements on Microstructure Variations in a Secondary Cast Aluminium Piston Alloy
T.O. Mbuya1, I. Sinclair1, B.R. Mose2, S.M. Maranga2, P.A.S. Reed1
1) University of Southampton, UK, 2) Jomo Kenyatta University of Agriculture & Technology, Kenya
3D-03
pdf
Influence of Internal Architectures of Cast AlSi10Cu5Ni1-2 on High Temperature Strength
Z. Asghar1, G. Requena1, H.P. Degischer1, E. Boller2
1) Vienna University of Technology, Austria, 2) European Synchrotron Radiation Facility, France
3D-04
pdf
Direct Observation of Solidification Behavior in Al-Si-Cu-Fe System
B. Kim1, H. Yasuda2, S. Lee1
1) Korea Institute of Industrial Technology, Korea, 2) Osaka University, Japan
3D-05
pdf
Application of Liquid Hot Isostatic Pressure Technique for Processing of Aluminum Cast Articles
R. Kaibyshev, D. Tagirov, M. Tikhonova, E. Ivanova
Belgorod State University, Russia
3D-06
pdf
Modeling of Damage Behavior of Cast Aluminum Components Taking into Account Porosity Effects
D.Z. Sun1, A. Ockewitz1, F. Andrieux1, H. Klamser2
1) Fraunhofer Institute for Mechanics of Materials, Germany, 2) Porsche AG, Germany
3D-07
pdf
On the Effect of De-gassing over Melt Quality of A 354 Alloy
S. Akhtar1, R. Molina2, D. Dispinar3, M. Di Sabatino3, L. Arnberg1
1) Norwaygian University of Science and Technology, Norway, 2) Teksid Aluminum, Itlay, 3) Sintef Materials and Chemistry, Norway
3D-08 (link to Mater. Trans.)
pdf
Effect of Secondary-Phase Particle Morphology on Tear Toughness of Al-Mg-Si-Mn Aluminum Alloy Castings
D. Shimosaka1, S. Kumai1, F. Casarotto2, S. Watanabe3
1) Tokyo Institute of Technology, Japan, 2) Aluminium Rheinfelden GmbH, Germany, 3) ITOCHU Corporation, Japan
3D-09
pdf
Substitution of Nickel by Combined Addition of Cobalt and Zirconium in Alloy A 332
A. Wüstenhagen, B. Tonn
Clausthal University of Technology, Germany
KL-14
pdfKeynote
3D Characterisation and Modelling of Fatigue Damage and Cracking in Metallic Alloys Using X-ray Tomography
J-Y Buffière1, N Limodin1, J Réthoré1, A Gravouil1, F Hild2, S Roux2
1) Université de Lyon INSA-Lyon, France, 2) PRES UniverSud Paris, France
3D-10
pdf
Development of Three-dimensional Plastic Strain Mapping Technique for X-ray Micro-tomography
M. Kobayashi1, H. Toda1, Y. Kawai1, M. Nakazawa2, Y. Aoki2, K. Uesugi3, Y. Suzuki3
1) Toyohashi University of Technology, Japan, 2) Keio University, Japan, 3) Japan Synchrotron Radiation Research Institute, Japan
3D-11
pdf
3D Visualisation of Corrosion Propagation in AA2024 Aluminium Alloy
C. Luo1, T. Hashimoto1, X. Zhou1, A.E. Hughes2, G.E. Thompson1
1) The University of Manchester, UK, 2) CSIRO Future Manufacturing Flagship, Australia
3D-12
pdf
Assessment of Actual Complicated Fatigue Crack Propagation via 3D Image-based Numerical Simulation
P.C. Qu1, H. Toda1, H. Zhang1, L. Qian2, M. Kobayashi1, K. Uesugi3
1) Toyohashi University of Technology, Japan, 2) Kyushu University, Japan, 3) Japan Synchrotron Radiation Research Institute, Japan
KL-15
pdfKeynote
Behavior of Hydrogen in Aluminum
G. Itoh
Ibaraki University, Japan
KL-16
pdfKeynote
Hydrogen Micro Pores and Their Affects on Mechanical Properties
H. Toda1, K. Uesugi2, Y. Suzuki2, M. Kobayashi1
1) Toyohashi University of Technology, Japan, 2) Japan Synchrotron Radiation Research Institute, Japan
KL-17
pdfKeynote
Advances in Laser Assisted 3D Atom Probe and Its Applications to Light Metals
K. Hono1,2, K. Oh-ishi1, C.L. Mendis1, T. Ohkubo1,2
1) National Institute for Materials Sciences, Japan, 2) Japan Science and Technology Agency, Japan
IL-32
pdfInvited
Application of Electron Tomography for Characterizing Precipitate Morphologies in Aluninum Alloys
K. Kaneko
Kyushu University, Japan
3D-13
pdf
Atom Probe Study of Shear-Induced Dissolution of GP Zones in Al-3Cu Alloy
R.K.W. Marceau1,2, S. P Ringer1,2, J. da Costa Teixeira1,3,4, C.R. Hutchinson1,3
1) ARC Centre of Excellence for Design in Light Metals, Australia, 2) The University of Sydney, Australia, 3) Monash University, Australia, 4) Institut Jean Lamour, France
3D-14
pdf
Methods for the Study of Clustering and Precipitation in Al-based Alloys by APT
W. Lefebvre1, F. Vurpillot1, M. Torsaeter2, F. De Geuser3
1) Groupe de Physique des Matériaux, France, 2) Norwegian University of Science and Technology, Norway, 3) SIMAP, France
3D-15
pdf
Clustering Behaviour in Al-Mg-Si Alloys Investigated by APT
M. Torsæter1, W. Lefebvre2, S.J. Andersen3, C.D. Marioara3, J.C. Walmsley1,3, R. Holmestad1
1) Norwegian University of Science and Technology, Norway, 2) Université de Rouen, France, 3) SINTEF, Norway
3D-16
pdf
Precipitate/Matrix Interface in an Al-Mg-Ge Alloy Studied by Annular Dark-Field Scanning Transmission Electron Microscopy
R. Bjørge1, P.N.H. Nakashima2, C.D. Marioara3, S.J. Andersen3, B.C. Muddle2, J. Etheridge2, R. Holmestad1
1) Norwegian University of Science and Technology, Norway, 2) Monash University, Australia, 3) SINTEF, Norway,
KL-12
pdfKeynote
Towards Innovation in Materials Design for Aluminum Alloys with First Principle Calculations
K. Higashi
Osaka Prefecture University, Japan
IL-23
pdfInvited
First-Principles Study of the Bonding and Mechanical Properties of Metallic Grain Boundaries
M. Kohyama1, S. Tanaka1, R.Z. Wang2, Y. Shiihara3, S. Saitou4, T. Tamura1, S. Ishibashi1
1) National Institute of Advanced Industrial Science and Technology, Japan, 2) Beijing University of Technology, China, 3) The University of Tokyo, Japan, 4) Nationa Institute for Materials Science, Japan
IL-24
pdfInvited
Decohesion of Al Grain Boundary by Hydrogen and Liquid Metals: A First-Principles Study
M. Yamaguchi, K. Ebihara, M. Itakura, T. Suzudo, H. Kaburaki
Japan Atomic Energy Agency, Japan
3E-01
pdf
Modeling Solid Solution Strengthening Using First-Principles Results of Misfit Strain with Friedel Model in Al-Based Alloys
T. Uesugi, K. Higashi
Osaka Prefecture University, Japan
3E-02
pdf
Chemical Bonding in Aluminium and Its Influence on Precipitates in Al Alloys
P.N.H. Nakashima, A.E. Smith, C. Qiu, B.C. Muddle
Monash University, Australia
3E-03
pdf
Atomistic Ab Initio Studies of Precipitate/Host Lattice Interfaces
F.J.H. Ehlers1, S.J. Andersen2, C.D. Marioara2, R. Holmestad1
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway
IL-29
pdfInvited
Deformation Twinning in Bulk Aluminum with Coarse Grains
Y. Matsukawa
Tohoku University, Japan
3E-04
pdf
Modeling of the Yield Strength Evolution in Al-Mg-Si Alloys
P. Lang, A. Falahati, E. Povoden-Karadeniz, M.R. Ahmadi, P. Warczok, E. Kozeschnik
Vienna University of Technology, Austria
3E-05
pdf
Crystal Plasticity Analysis of Ridging in 6000 Series Alloys
H. Konishi, K. Matsumoto, Y. Takaki, Y. Aruga
Kobe Steel, Ltd., Japan
IL-30
pdfInvited
Significance of Trace Element Segregation in Corrosion of Aluminum Alloys
K. Nisancioglu
Norwegian University of Science and Technology, Norway
3E-06
pdf
Sealing Mechanism of Anodic Porous Oxide Films Formed on Aluminum in Lithium Hydroxide Solution
S. Ono1, M. Okura1, H. Asoh1, H. Tanaka2, T. Yamamoto2
1) Kogakuin University, Japan, 2) Suzuki Motor Corporation, Japan
3E-07
pdf
Influence of Crystallographic Orientation on Corrosion Behavior of 5N Purity Aluminum
Y. Takayama, K. Nohara, H. Kato
Utsunomiya University, Japan
3E-08
pdf
Following the Kinetics of Localised Corrosion on AA6111 Using SVET
A.E. Holder1, H.N. McMurray1,G. Williams1, G. Scamans2
1) Swansea University, UK, 2) Innoval Technology Ltd., UK
3E-09
pdf
Electrochemical Activation of Surface Deformed Layers on Aluminium Alloys and Pure Aluminium
H.N. McMurray1, A.E. Holder1, G. Williams1, G. Scamans2
1) Swansea University, UK, 2) Innoval Technology Ltd., UK
3E-10
pdf
Electrochemical Impedance Characteristics of 7075 Aluminum Alloys Produced by Conventional and Powder Extruded Methods under SSRT Test
S. Sunada1, S. Kanayama2, N. Nunomura1, K. Majima1
1) University of Toyama, Japan, 2) Sankyo-Tateyama Holdings, Inc., Japan
3E-11
pdf
Improvements in Corrosion Resistance Offered By Newer Generation 2x99 Aluminum-Lithium Alloys for Aerospace Applications
J.P. Moran1, F.S. Bovard1, J.D. Chrzan1, R.J. Rioja1, E.L. Colvin2
1) Alcoa Inc., USA, 2) Alcoa Forgings and Extrusions, USA
3E-12
pdf
Results from Field Testing of Aluminium Extrusions on a Truck for Six Years. Comparisons with Accelerated Corrosion Testing.
Ø. Bauger, T. Furu
Hydro Aluminium Research and Technology Development, Norway
3E-14
pdf
Pitting Corrosion of Aluminum Alloy in Marine Environment
Y. Oya, Y. Kojima
Furukawa-Sky Aluminum Corp., Japan
3E-15
pdf
Effect of Additional Cu and Mg in Al-Mn-Si Alloy on Intergranular Corrosion Susceptibility After Heat-treatment at 473K
S. Iwao, M. Edo, S. Kuroda
Mitsubishi Aluminum Co., Ltd. Japan
3E-16
pdf
Effect of Additional Fe, Ni, Mn, Si and Cu on Corrosion Resistance of Aluminum Alloy Fin Stock for Automotive Heat Exchangers
M. Yoshino, M. Edo, S. Kuroda
Mitsubishi Aluminum Co., Ltd., Japan
IL-33
pdfInvited
Processing and Properties of Cluster Strengthened Aluminium Alloys
S. P Ringer
The University of Sydney, Australia
4A-01
pdf
On The Solute Clustering Effect of Cu to Stimulate Enhanced Age-Hardening in 7000 Series Al-Zn-Mg-Cu
P.V. Liddicoat1, S.K. Maloney2, S.P. Ringer1
1) The University of Sydney, Australia, 2) New Zealand Aluminium Smelters Limited, New Zealand
4A-02
pdf
Effects of High Temperature Retrogression and Re-aging Treatments on Microstructures and Properties of 7150 Alloy
B. Nie, P. Liu, T. Zhou, Z. Zhang
Beihang University, China
4A-03
pdf
Simulation of Aluminum Alloys Homogenization
C. Sigli
Alcan Centre de Recherches de Voreppe, France
4A-04 (link to Mater. Trans.)
pdf
Statistical Analysis for Influence of Factors on Morphological Evolution in Semi-Solid Al-6Zn-2.5Mg-0.5Cu Alloy by Cooling Plate Method
S.Y. Shim, D.H. Kim, Y.R. Seong, S.G. Lim
Gyeongsang National University, Korea
4A-05
pdf
Thermodynamic Simulations of Multicomponent Phase Diagrams on the Base of Aluminum and Experimental Microstructure Analysis of the Alloys with a Considerable Quantity of Multiphase Eutectics
V.V. Cheverikin1, V.S. Zolotorevskiy1, A.V. Khvan1, T. Hernandez Lara1,2
1) National University of Science and Technology "MISiS", Russia, 2) Institut National Polytechnique de Lorraine, France
IL-34
pdfInvited
Re-examination of Deformation Mechanism Map of Pure Aluminum
E. Sato1, Y. Takayama2, T. Shibayanagi3, K. Kitazono4
1) Japan Aerospace Exploration Agency, Japan, 2) Utsunomiya University, Japan, 3) Osaka University, Japan, 4) Tokyo Metropolitan University, Japan
4B-01
pdf
Creep Deformation Mechanism of Al-Mn Alloy Sheets with a Wide Range of Grain Size
S. Hirosawa 1, S. Yokawa1, A. Sakai1, M. Ando2, A. Niikura2, Y. Suzuki2
1) Yokohama National University, Japan, 2) Furukawa-Sky Aluminum Corp., Japan
4B-02
pdf
Microstructure and Creep Behavior of AlSiCuMgNi Piston Alloys
S. Ketabchi1, R. Mahmudi2, S.G. Shabestari1
1) Iran University of Science and Technology, Iran, 2) University of Tehran, Iran
4B-03
pdf
Mechanisms of Sagging during Brazing of Aluminium Heat Exchangers
B. Hutchinson1, O. Rod1, M. Nylén1, A. Carlsson2, A. Oskarsson2
1) Swerea-KIMAB, Sweden, 2) Sapa Technology, Sweden
4B-04
pdf
Research of the Artificial Ageing Parameters Effect on Low-Temperature Creep of AlMgSi Wires
B. Smyrak, T. Knych, A. Mamala1
1) AGH University of Science and Technology, Poland
4C-01
pdf
Effect of Grain Refinement on Forming and Brazing Characteristics of Al-Mn Alloy
J. Shin, B. Kim, Y. Kim, J. Hong, B. Moon, H. Cho
Korea Institute of Industrial Technology, Korea
4C-02 (link to Mater. Trans.)
pdf
Relating Quench Sensitivity to Microstructure in 6xxx Series Alloys
K. Strobel, M.A. Easton, E.D. Sweet, M.J. Couper, J.F. Nie
Monash University, Australia
4C-03
pdf
Prediction of Fracture of Aluminium Alloy with Surface Flaw in Upsetting
M. Itoh1, A. Sasaki2
1) Kisarazu National College of Technology, Japan, 2) Yamaha Fine Technologies Co., Ltd., Japan
4C-04
pdf
Influence of Process Cooling on the Workpiece Quality in Face Milling of Aluminum Alloys
D. Biermann, M. Heilmann, K. Pantke
Technische Universität Dortmund, Germany
KL-18
pdfKeynote
Innovative Foaming Processes for Ultra Light Weight Aluminum Foams
N. Kanetake
Nagoya University, Japan
4D-01
pdf
Performance Characterization of Alcoa Aluminum Foam Products
J.D. Bryant, D.E. Hunter, M.D. Crowley, W. Zhang
Alcoa Technical Center, USA
4D-02
pdf
Foaming Technique of Porous Aluminum/Intermetallics Composites by Precursor Method
M. Kobashi, N. Kanetake
Nagoya University, Japan
4D-03
pdf
Effect of Foaming Agent on Pore Initiation and Growth of Aluminum Foam
J. Ogi, M. Kobashi, N. Kanetake
Nagoya University, Japan
4D-04
pdf
Fabrication of Lotus-type Porous Aluminum by Continuous Casting Technique
T. Ide, Y. Iio, H. Nakajima
Osaka University, Japan
4D-05
pdf
Modeling for Anisotropic Foaming of Aluminum Precursor
R. Suzuki, K. Kitazono
Tokyo Metropolitan University, Japan
P001
pdf
Effects of Mechanical Vibration on Gravity Die Casting of AC4C Aluminum Alloy
N. Omura1, T. Tamura1, K. Miwa1, H. Furukawa2, M. Harada2, T. Kubo2
1) National Institute of Advanced Industrial Science and Technology, Japan, 2) Kotobuki Kinzoku Kogyo Co. LTD, Japan
P002
pdf
Dissolution and Melting of Constituent Particles in a DC-cast Al-Zn-Mg-Cu Alloy 7150 During Homogenisation
H. Chen1, S.X. Gao2, P.A. Rometsch2, D. Xu2, B.C. Muddle2
1) Southwest Aluminium Co. Ltd., China, 2) Monash University, Australia
P003
pdf
Prediction Method of Crack Sensitivity during DC Casting of Al-Mn and Al-Mg Series Aluminum Alloys
M. Morishita1, M. Abe1, M. Yoshida2
1) Kobe Steel Ltd., Japan, 2) Waseda University, Japan
P004
pdf
Microstructure and Property Variation of Roll-bonded 4xxx/3003/4xxx Aluminum Clad Sheets with Thermomechanical Process
K.J. Euh, J.H. Kang, S.H. Kim, H.W. Kim, D.B. Kim
Korea Institute of Materials Science, Korea
P005
pdf
The Effects of Low Frequency Electromagnetic Field on Multi-physical Fields during the Start-up Phase of DC Casting Process
H. Zhang1, J. Cui1, H. Nagaumi2
1) Northeastern University, China, 2) Suzhou Institute for Nonferrous Metals Research, China
P006
pdf
Deformation Behavior and Microstructure Evolution of an Aircraft Al-Cu-Mg-Mn Alloy at the Elevated Temperature
Y. Huang, Z. Chen, S. Li, W. Yang
Central South University, China
P007
pdf
Surface Segregation in DC-cast Aluminium AA5182, Measured in GDMS (Glow Discharge Mass Spectrometer) and Discussed in View of the Phase Diagram
A.L. Dons1, T. Furu2
1) SINTEF Metallurgi, Norway, 2) Norsk Hydro, Norway
P008
pdf
Evolution of the Nanostructure of a 7xxx Alloy During Retrogression and Re-ageing as Investigated by ASAXS and Atom Probe Tomography
T. Marlaud1,2, A. Deschamps2, W. Lefebvre3
1) Rio Tinto Alcan, France, 2) SIMAP, France, 3) Groupe de Physique des Materiaux, France
P009
pdf
Surface Segregation in Aluminium AA6xxx, Measured in GDMS(Glow Discharge Mass Spectrometer) and Calculated with Alsim/Alstruc
A.L. Dons1, K. Ellingsen1, T. Furu2, B.R. Henriksen3, D. Mortensen4
1) SINTEF Metallurgi, Norway, 2) Norsk Hydro, Norway, 3) Elkem Aluminium, Norway, 4) Institute for Energy Technology, Norway
P010
pdf
Thermoelectric Power Characterization of 7xxx Aluminium Alloys during Ageing
S. Chen1, R. Frinking2, C. Lahaye1, M. van der Winden1, A. Bürger3
1) Corus Research, Development & Technology, Netherlands, 2) Delft University of Technology, Netherlands, 3) Aleris Aluminium Koblenz GmbH, Germany
P011
pdf
Effects of Alloying Additions and Cooling Rate on the Microstructures and Mechanical Properties of the Cast Al-Mg-Si Alloys
J.M. Lee1, K.H. Kim1, H.J. Kim1,2, Y.S. Ahn2
1) Korea Institute of Materials Science, Korea, 2) Pukyung National University, Korea
P013
pdf
In-line Degassing Treatment of A356 Alloy Using the Electromagnetic Melt Transferring Pump
J.M. Lee1, H.S. Sim2, V. Dubodelov3, V. Fikssen3, M. Slazhniev3
1) Korea Institute of Materials Science, Korea, 2) Dongsan Tech., Co., Ltd., Korea, 3) Physico-Technological Institute of Metals and Alloys, Ukraine
P014
pdf
Microstructure Behavior of Al-Mg-Si Alloy Processed by ECAP and Its Thermal Stability
T. Kovářík1, J. Zrník2
1) Univerzitní 22, Plzeň, Czech Republic, 2) Comtes FHT Ltd., Czech Republic
P015
pdf
Effect of Ca Addition on Microstructure of Semi-Solid Al-Zn-Mg Al Alloys During Reheating
H.W. Park, I.S. Jeong, Y.H. Kim, S.G. Lim
Gyeongsang National University, Korea
P016 (link to Mater. Trans.)
pdf
Dissimilar Metal Joining of 2024 and 7075 Alloy to Titanium Alloys by Friction Stir Welding
M. Aonuma1, K. Nakata2
1) Tokyo Metropolitan Industrial Technology Research Institute, Japan, 2) Osaka University, Japan
P017
pdf
Effect of Ultrasonic Treatment on the Microstructures and Mechanical Properties of Die Casting Aluminum Alloys
G.S. Cho, Hun-Jang, K.H. Choe, W.Y. Kim
Korea Institute of Industrial Technology, Korea
P018
pdf
Laser Joining of Different Materials between Aluminum and Plastic Using Insert Materials
M. Hino1, Y. Mitooka1, K. Murakami1, K. Uragami2, T. Kanadani3
1) Industrial Technology Research Institute of Okayama Prefecture, Japan, 2) Hayakawa Rubber Co. Ltd., Japan, 3) Okayama University of Science, Japan
P019
pdf
Characterization of Dendrite Morphology for Al-based Alloy by Phase-field Model
Y. Natsume, H. Ishida
Kobe Steel, Ltd., Japan
P020
pdf
Deformation Process on Magnetic Pressure Seam Welding of Aluminum Sheets
M. Miyazaki1, K. Sasaki2, M. Okada2
1) Nagano National Collage of Technology, Japan, 2) Asahikawa National collage of Technology, Japan
P021
pdf
Mechanical Behaviors and Stability of Al-rich Al-Mg-B Alloys
J.I. Cho1, S. Kim2
1) Korea Institute of Industrial Technology, Korea, 2) University of Wisconsin-Madison, USA
P022
pdf
Instability of Microstructure in Friction Stir Welded 5083 Aluminum Alloy Sheets during Post-Weld Heat Treatment
T. Shibayanagi, T. Yoshioka, K. Ikeuchi
Osaka University, Japan
P023
pdf
Mechanical and Die Soldering Properties of Al-Si-Mg Alloys with Vacuum HPDC Process
C.Y. Jeong1, Y.S. Kim1, J.H. Ryu1, H.J. Kim2
1) Dongguk University, Korea, 2) Pukyong National University, Korea
P024 (link to Mater. Trans.)
pdf
The Effect of Zn-based Alloys Coating on Bondability of Resistance Spot Welding of Steel/Aluminum Alloy Dissimilar Joint
K. Ueda1, T. Ogura1, S. Nishiuchi1, K. Miyamoto2, T. Nanbu2, A. Hirose1
1) Osaka University, Japan, 2) Nissan Motor Co., Ltd., Japan
P025
pdf
Influence of Silicon, Superheat and Injection Speed on the Fluidity of HPDC Al-Si Alloys
Y.C. Kim1, S.W. Choi1, J.I. Cho1, C.W. Kim 1, C.S. Kang1, S.K. Hong2
1) Korea Institute of Industrial Technology, Korea, 2) Chonnam National University, Korea
P026
pdf
Cold Joining of Aluminium Sheets by Shot Peening
Y. Harada1, M. Nunobiki1, Y. Kobayashi2
1) University of Hyogo, Japan, 2) Sintokogio, Ltd., Japan
P027 (link to Mater. Trans.)
pdf
Hydrogen Trapping Affected by Cr in Rapidly Solidified Aluminium
I.I. Tashlykova-Bushkevich1, T. Shikagawa2, V.G. Shepelevich3, G. Itoh2
1) Belarusian State University of Informatics and Radioelectronics, Belarus, 2) Ibaraki University, Japan, 3) Belarusian State University, Belarus
P028
pdf
Material Flow, Stir Zone Growth and Complex Deformation Modes in Friction Stir Welding of Single Crystal Pure Aluminum
T. Shibayanagi1, K. Mizushima1, A.P. Gerlich2, T.H. North3, K. Ikeuchi1
1) Osaka University, Japan, 2) University of Alberta, Canada, 3) University of Toronto, Canada
P029
pdf
Patterns of Concentration-Depth Profiles in Melt-Substrate Quenched Aluminium Alloys
I.I. Tashlykova-Bushkevich
Belarusian State University of Informatics and Radioelectronics, Belarus
P030 (link to Mater. Trans.)
pdf
Microstructure and Joint Strength of Friction Stir Spot Welded Aluminum Alloy Sheets and Plated Steel Sheets
K. Feng, M. Watanabe, S. Kumai
Tokyo Institute of Technology, Japan
P031
pdf
Hot Tearing of Thin-walled Al-Mg Alloy in Die-casting
S.W. Choi1, Y.C. Kim1, J.I. Cho1, S.K. Hong2, C.S. Kang1
1) KITECH, Korea, 2) Chonnam National University, Korea
P032 (link to Mater. Trans.)
pdf
Interfacial Microstructure and Mechanical Properties of Dissimilar Friction Stir Weld between AA6061-T6 and Ti-6Al-4V
K.J. Lee1, K.S. Bang1,2, H.S. Bang2, H.S. Bang2
1) Korea Institute of Industrial Technology, Korea, 2) Chosun University, Korea
P033
pdf
PC Programmed Automatic Level Control for Quality Casting Using the Precimeter Control System
J. Strömbeck1, T. Jarlsmark1, M. Terner1, J. Wilkins2, M. Suzuki3
1) Precimeter Control AB, Sweden, 2) Sentech Precimeter Inc., USA, 3) Ai Precimeter Co., Ltd., Japan
P034
pdf
Temperature Measurement during Friction Stir Welding of Dissimilar Aluminum Alloys
Y. Takayama, Y. Akutsu, N. Choshiro, H. Kato, H. Watanabe
Utsunomiya University, Japan
P035
pdf
Interfacial Microstructure of Sticking Phenomena between Die Casting Dies and Molten Al-Si Alloys
S. Saikawa1, T. Kawabata2, M. Miura1, N. Sakai1, T. Gonoji2, J. Nakamura2, S. Ikeno2, K. Matsuda2
1) Ahresty Co., Ltd., Japan, 2) University of Toyama, Japan
P037
pdf
Development of Vibrating Cooling Slope (VCS) Method for Enhancing a Globular Structure in Aluminum A356 alloy
F. Akhlaghi, A. Taghani
University of Tehran, Iran
P038
pdf
Investigation of Aluminum Coating with Dispersed Nanoscale Quasicrystalline Particles Produced by Cold Spray
M. Fujita1, M. Hishida1, K. Sakaki2, M. Sakaguchi3, M. Okazaki3
1) Honda R&D Co., Ltd., Japan, 2) Shinshu University, Japan, 3) Nagaoka University of Technology, Japan
P039
pdf
Apparatus Design and Electromagnetic Continuous Casting Process for Near Net-Shaped Aluminum Alloy Billet
J.H. Kim1, M.G. Kim1, J. Kim1, J.P. Park1, G.C. Lee1, I.S. Cho2
1) Research Institute of Industrial Science and Technology, Korea, 2) Korea Institute of Industrial Technology, Korea
P040
pdf
Influence of Magnesium on Formation and Growth of Nitride Layer on Aluminum Substrate
M. Yoshida1, M. Okumiya2, Y. Tsunekawa2
1) Shizuoka Institute of Science and Technology, Japan, 2) Toyota Technological Institute, Japan
P041
pdf
Effect of Melt Shearing on Morphological Change of Iron-bearing Intermetallic Phases in the Al-Si Casting Alloys
B. Kim1, S. Lee1, J. Kim2, J. Park2
1) Korea Institute of Industrial Technology, Korea, 2) Hanbat National University, Korea
P042
pdf
Effect of Machining Parameter on Microstructural Characteristics of Iron-Silicon Alloyed Layer of 5083 Al Alloy by EDA Processing
H.M. Lin1, S. Kuralay2, J.Y. Uan2
1) Far East University, Taiwan, 2) National Chung Hsing University, Taiwan
P043
pdf
Microstructure and Mechanical Properties of Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process
K. Eidhed1, H. Tezuka2, T. Sato2
1) King Mongkut's University of Technology North Bangkok, Thailand, 2) Tokyo Institute of Technology, Japan
P044
pdf
Repair of Surface Defects in Cast Products by Friction Stir Processing Method
T. Knych, M. Blicharski, P. Uliasz
AGH University of Science and Technology, Poland
P045
pdf
SiC/Aluminum Composites Fabricated by in situ Processing using Reactive Infiltration Aid
M. Kobashi, M. Hirako, N. Kanetake
Nagoya University, Japan
P046
pdf
Effects of Magnesium on Precipitated Phase in 7150 Aluminum Alloy Based on Thermodynamics
J. He, T. Zhou, P. Liu
Beijing University of Aeronautics and Astronautics, China
P047 (link to Mater. Trans.)
pdf
Foaming Behavior and Cell Morphology of Rolled Sheet Precursors Made of Pure Aluminum, 6061Al, Al-7Si powders
M. Kobashi, M. Noguchi, N. Kanetake
Nagoya University, Japan
P048
pdf
Choice of Rational Alloying Concentration Intervals and Modifying of Al-Cu-Mg and Al-Zn-Mg-Cu Systems Aluminium Alloys
B.V. Ovsyannikov1, V.M. Zamyatin2, V.L. Smirnov2, V.S. Mushnikov2
1) Kamensk Uralsky, Russia, 2) Ural State Technical University, Russia
P049 (link to Mater. Trans.)
pdf
Effect of Compaction Temperature on Sinterability of Magnesium and Aluminum Powder Mixtures by Warm Compaction Method
T. Iwaoka1, M. Nakamura2
1) Tokyo Metropolitan Industrial Technology Research Institute, Japan, 2) Iwate University, Japan
P050
pdf
Calculation and Experimental Investigation of Structure and Phase Composition of 6XXX Alloys
P. Bryantsev, M. Samoshina
National University of Science and Technology "MISiS", Russia
P051
pdf
Fabrication of CNF Reinforced Aluminum Composites by Compressive Torsion Processing
H. Kimura, Y. Kume, M. Kobashi, N. Kanetake
Nagoya University, Japan
P052 (link to Mater. Trans.)
pdf
Nanoindentation Measurement of Interfacial Reaction Layers in Aluminum and Steel Dissimilar Metals Joints with Alloying Elements
T. Ogura, K. Ueda, Y. Saito, A. Hirose
Osaka University, Japan
P053
pdf
Thermal Stability of Nanostructured Pure Aluminium Produced by Mechanical Milling and Spark Plasma Sintering
M. Kubota1, B.P. Wynne2
1) Nihon University, Japan, 2) The University of Sheffield, UK
P054
pdf
Precipitation Kinetics in an Al-Zn-Mg Alloy by New Rate Equation
H. Yoshida1, S. Yamamoto2
1) Sumitomo Light Metal Industries, Ltd., Japan, 2) Kyoto University, Japan
P056
pdf
Effect of Ultrasound Treatment on Age-Hardening Response in an Al-Mg-Si Alloy
S. Hirosawa1, J. Kamibeppu1, M. Iqbal1,H. Hosoda2, T. Sato2
1) Yokohama National University, Japan, 2) Tokyo Institute of Technology, Japan
P057
pdf
Novel Aluminium Based Composite Materials Exhibiting Magnetic Properties Fabricated by Mechanical Alloying and Spark Plasma Sintering
S. Aoki, M. Kubota
Nihon University, Japan
P058
pdf
Development of G-P Zones on {111}Al Planes During Natural Aging of an Al-Zn-Mg-Cu-Zr Alloy
A.K. Mukhopadhyay, K.S. Prasad
Defence Metallurgical Research Laboratory, India
P059
pdf
The Effect of Zirconium and Scandium Additions on Electrical Resistance, Strength and Thermal Stability of Cold Rolled Aluminium Sheets
A.N. Alabin1, N.A. Belov1, A.Y. Prokhorov2, N.Y. Tabachkova1
1) National Research and Technological University "MIS&A", Russia, 2) OAO "Kirskabel", Russia
P061
pdf
Effect of Cryorolling on the Microstructure and Mechanical Properties of AA2198 alloy
B. Srinivasarao, W. Lefebvre
Groupe de physique des Matériaux, France
P062
pdf
Modeling of the Retrogression Microstructure Behavior of 7075 Aluminum Alloy
B. Nie1, P. Liu1, T. Zhou1, Z. Zhang1, Z. Du2
1) Beihang University, China, 2) General Research Institute for Nonferrous Metals, China
P064
pdf
Al Alloys Development Assisted by Thermodynamic Kinetics Phase Field Simulations and Experiments
N. Masquelier1, S.G. Fries1,2, H. Zapolsky1, W. Lefebvre1, R. Patte1, P. Pareige1
1) Université et INSA de Rouen, France, 2) Ruhr-University Bochum, Germany
P065
pdf
Mechanical Properties of Al/Al-Mg/Al Clad Sheets Fabricated by Roll Bonding Process
H.W. Kim1, M.G. Kim, J. Cho, S.H. Kim
Korea Institute of Materials Science, Korea
P066
pdf
Application of the Diagrams of Phase Transformations during Aging for Optimizing the Aging Conditions for V1469 and 1441 Al-Li Alloys
E.A. Lukina, A.A. Alekseev, V.V. Antipov, D.V. Zaitsev, Y.Y. Klochkova
All-Russia Scientific Research Institute of Aviation Materials, Russia
P067
pdf
Sectional Shape Analysis of Aluminum Alloy Seat Tube of Bicycle
D.C. Chen, M.W. Guo, C.S. You, C.H. Jao
National Changhua University of Education, Taiwan
P069
pdf
Influence of Scandium Content, Additional Alloying Elements and Strain Parameters on Properties of AlMgSc System Alloy Products
B.V. Ovsyannikov
Kamensk Uralsky, Russia
P071
pdf
Developing a Predictive Weld-Seam Formation Model: Experimental Support
A.J. den Bakker1, R.J. Werkhoven2, W.H. Sillekens2, L. Katgerman3
1) Nedal Aluminium, Netherlands, 2) TNO Science & Industry, Netherlands, 3) Delft University of Technology, Netherlands
P072
pdf
Variation of Aging Behavior for Al-Mg-Si Alloys with Different TMs Addition
S. Wang, K. Matsuda, T. Kawabata, S. Ikeno
University of Toyama, Japan
P073
pdf
The Effect of Extrusion Temperature on Recrystallized Grain Structures of Extruded Al-Mg-Si Alloys
K. Ihara, T. Shikama
Kobe Steel, Ltd., Japan
P074
pdf
Effect of Transition Metals on Aging Behavior of Al-Mg-Si Alloys
T. Nagai, K. Matsuda, H. Nishita, J. Nakamura, T. Kawabata, S. Ikeno
University of Toyama, Japan
P075
pdf
Development of Mobile Phone Case with Decorative Surface by Two-Stage Forming Process
T.C. Cheng1,2, Y.Y. Chu1,2, C.C. Wang1,2
1) Metal Industries Research and Development Centre, Taiwan, 2) National Cheng Kung University, Taiwan
P076
pdf
Precipitation in a High-strength Al-Cu-Li Alloy
J.C. Shih, M. Weyland, B.C. Muddle
Monash University, Australia
P077
pdf
Grain Shape Evolution and Prediction for AA6082
A. Segatori1, A. Foydl2, L. Donati1, A. Brosius 2, L. Tomesani1, A.E. Tekkaya2
1) University of Bologna, Italy, 2) Technische Universität Dortmund, Germany
P078
pdf
Effects of 0.5wt% In on Precipitation Processes in Al-Cu-(Li) Alloys
Z.R. Pan, Z.Q. Zheng, S.C. Li, Z.Q. Liao
Central South University, China
P079
pdf
Influence of Grain Size and Lubricant on Forming of Micro-parts by Forward-Backward Extrusion of 6063 Aluminum Alloy
N. Takatsuji1 , S. Hosokawa1 , K. Dohda2, T. Makino2
1) University of Toyama, Japan, 2) Nagoya Institute of Technology, Japan
P080
pdf
Phase Reactions of Al-Ti-B Ternary and Al-Ti-B-O Quaternary Systems for Al-based Metal Matrix Composites
H. Hosoda, T. Inamura, T. Shimoyamada, H. Noma, K. Wakashima
Tokyo Institute of Technology, Japan
P081
pdf
Forming of Aluminum Helical Gear by Twist Extrusion Processing
N. Takatsuji1, Y. Takarada1, T. Aida1, K. Tanpa2
1) University of Toyama, Japan, 2) Masuoka Co., Ltd., Japan
P082
pdf
Al3Zr and Al3(Zr,Sc) Dispersoids and their Interaction with Solute Elements Investigated by Atom Probe Tomography and Scanning Transmission Electron Microscopy
W. Lefebvre1, K. Hoummada2, B. Srinivasa Rao1
1) Groupe de Physique des Matériaux, France, 2) Université Paul Cézanne Laboratoire, France
P083
pdf
Use of Resin Tooling with Sheet Metal Hydroforming for the Manufacture of Aluminum Alloy Cases
C.T. Wu1,2, M.F. Li1, C.C. Wang1, K.S. Wang3, W.W. Zheng3
1) Metal Industries Research & Development Centre, Taiwan, 2) Cheng Kung University, Taiwan, 3) Hua-Chuang Automobile Information Technical Center, Taiwan
P084
pdf
Effect of Additional Elements on the Age Harding Behavior of Al-Zn-Mg-Si alloys
H. Tokugawa1, K. Iida1, J. Nakamura1, K. Matsuda1, T. Kawabata1, S. Ikeno1, T. Yoshida2, S. Murakami2
1) University of Toyama, Japan, 2) Aisin keikinnzoku Co. Ltd., Japan
P085
pdf
Development of High-strength Aluminum Extrusion Alloy for Automobile Bumper
H. Cho1, S.D. Kim1, C.G. Kim2, J.H. Kim2 , C. Lee2
1) Korea Institute of Industrial Technology, Korea, 2) KORES Co., Ltd., Korea
P086
pdf
Influence of Ge-Si Additions on Ageing Response and Properties in 2xxx Alloys
L. Zhuang1, S. Chen1, A.F. Norman1, M. van der Winden1, A. Bürger2, S. Spangel2
1) Corus Research, Development & Technology, Netherlands, 2) Aleris Aluminium Koblenz GmbH, Germany
P087 (link to Mater. Trans.)
pdf
Experimental Observation of Elasto-Plasticity Behavior of Type 5000 and 6000 Aluminum Alloy Sheets
S. Tamura 1, S. Sumikawa 1, T. Uemori 2, H. Hamasaki1, F. Yoshida1
1) Hiroshima University, Japan, 2) Kindai University, Japan
P088
pdf
The Effect of Alloying Elements on the Metastable Zr Solid Solubility and Precipitation of L12 Al3Zr Precipitates in Aluminium Alloys
Z. Jia1, J. Friis1,2 B. Forbord2,3, J.K. Solberg1, K. Marthinsen2
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway, 3) Scandpower AS, Norway
P089
pdf
Springback Analysis of Aluminum Alloy Sheet with Special Reference to Effect of Planar Anisotropy
T. Uemori1, S. Sumikawa2, S. Tamura2, H. Akagi1, F. Yoshida2
1) Kindai University, Japan, 2) Hiroshima University, Japan
P090
pdf
The influence of Mg/Si Ratio on Phase Compositions in 2014 Aluminium Alloys after Casting and Heat Treatment
M.L. Grega
The Institute of Non-Ferrous Metals, Poland
P091 (link to Mater. Trans.)
pdf
Effects of Fe and Mn Additions on Semi-solid Microstructures of Al-Mg-Si Based Alloys in Deformation-Semi-Solid- Forming Process
C. Phongphisutthinan, H. Tezuka, T. Sato
Tokyo Institute of Technology, Japan
P092
pdf
Investigation of Non-isothermal Aging Process of 7085 Aluminum Alloy
K. Li1, K. Zhang2, L. Yang1, J.Z. Chen2, L. Zhen1, (J. Jiang')
1) Harbin Institute of Technology, China, 2) Beijing Institute of Aeronautical Materials, China
P093
pdf
Effect of Electrolyte Species on Crystallinity and Dielectric Properties of Anodic Oxide Films Formed on Aluminum
Y. Sato, H. Asoh, S. Ono
Kogakuin University, Japan
P094 (link to Mater. Trans.)
pdf
Evolution of the Microstructure of a {100} <001> Pure Aluminum Single Crystal during Severe Plastic Deformation
K. Kashihara1, W. Ikushima1, Y. Miyajima2, D. Terada2, N. Tsuji2
1) Wakayama National College of Technology, Japan, 2) Kyoto University, Japan
P095
pdf
Effect of Temperature and Heating Rate on Mechanical Properties of Aluminum Alloy 6061
B. Chen, J. Luo, Q. Yuan
Chongqing University, China
P096
pdf
Structural Evolution in Aluminum-Copper-Lithium-Magnesium Alloy Sheets during Processing
V. Shamray1, O. Grushko2, V. Timofeev1, E. Lazarev1, J. Klochkova2
1) Russian Academy of Sciences, Russia, 2) All-Russian Institute of Aviation Materials, Russia
P097
pdf
Effect of Heating-rate on the Thermal-mechanical Behavior of Pre-loaded Aluminium Alloy 6061-T6
B. Chen, Q. Yuan, J. Luo
Chongqing University, China
P098
pdf
Effects of Impurities on the Grain Growth of Aluminium Film
Y. Sasajima, T. Kato, T. Nagai, J. Onuki
Ibaraki University, Japan
P099
pdf
Consolidation of Rapidly Solidified Aluminum Alloy Powder by High Pressure Torsion
H. Adachi1, A. Tanaka2, J. Kusui2, Z. Horita3
1) Kyoto University, Japan, 2) Toyo Aluminum K. K., Japan, 3) Kyushu University, Japan
P100
pdf
Work Hardening and Softening of 4-6N Aluminum in the Processing of Cold Rolling and Heat Treatments
A. Ikeda, K. Yoshida, M. Takeda
Yokohama National University, Japan
P101
pdf
Effect of Pre-aging on Microstructure and Mechanical Property of Al-0.2wt% Sc Deformed by ARB
E. Borhani, H. Jafarian, T. Sato, D. Terada, Y. Miyajima, N. Tsuji
Kyoto University, Japan
P102 (link to Mater. Trans.)
pdf
Development of Ultra-fine Grained Structure in an Al-5.4%Mg-0.5%Mn Alloy Subjected to Severe Plastic Deformation
A. Kipelova, I. Nikulin, S. Malopheyev, R. Kaibyshev
Belgorod State University, Russia
P104
pdf
Prediction of Anisotropy and Yield Surface of Aluminum Sheet by Polycrystal Plasticity Theory
K. Kitayama1, T. Kobayashi1, T. Uemori2, F. Yoshida1
1) Hiroshima University, Japan, 2) Kindai University, Japan
P105
pdf
Microstructure and Deformation Properties of AA5352/Al-6%Mg Sheet Produced by the Direct Chill Casting FusionTM Process
H. Jin1, B. Wagstaff2, M. Gallerneault1, D.J. Lloyd1
1) Novelis Global Technology Centre, Canada, 2) Novelis Solatens, USA
P106
pdf
Microstructure Evolution at Ambient Temperature of 5N Purity Aluminum after Compression at Ambient and Liquid Nitrogen Temperatures
Y. Takayama, D. Furuguchi, S. Suzuki, H. Kato
Utsunomiya University, Japan
P107
pdf
The Optimization of Strength and Ductility in Heat Treated ADC12 Alloys
R.N. Lumley, N. Deeva, M. Gershenzon
CSIRO Light Metals Flagship, Australia
P109
pdf
Tensile Properties and Work Hardening Behaviour of Alloy 6016 in Naturally Aged and Pre-aged Conditions
H. Zhong1,2, P.A. Rometsch2, L. Cao2, F. Guo1, B.C. Muddle2
1) Suzhou Nonferrous Metals Research Institute, China, 2) Monash University, Australia
P110
pdf
Corrosion of Aluminum Die-castings Jointed with Rubber
M. Mori1, N.L. The1, G. Itoh1, N. Itoh1, Y. Shimada2
1) Ibaraki University, Japan, 4) Yamashita Rubber Co., Ltd., Japan
P111
pdf
Atom Probe Tomography Characterisation of Solute Clustering in AA6111
S. Li1,2, R.K.W. Marceau1,2, G. Sha1,2, W.J. Poole3, S.P. Ringer1,2
1) ARC Centre of Excellence for Design in Light Metals, Australia, 2) The University of Sydney, Australia, 3) The University of British Columbia, Canada
P112
pdf
Influence of Cell Size on Die Bending of Aluminum Alloy Honeycomb Structure
Y. Takayama, Y. Kitanosono, E. Watanabe, H. Watanabe, H. Kato
Utsunomiya University, Japan
P113
pdf
Effect of Alloying Elements on High Temperature Mechanical Properties for Piston Alloy
C.Y. Jeong, J.H. Ryu, Y.S. Kim
Dongguk University, Korea
P114
pdf
Mechanical and Wear Properties of Al-10Mg-Si Alloys Produced by Rapid Solidification and Powder Metallurgy Process
H. Egawa, M. Kubota
Nihon University, Japan
P115
pdf
Strengthening of Aluminum Foams through Vacuum Impregnation with Epoxy Resin
T. Takeda, R. Suzuki, K. Kitazono
Tokyo Metropolitan University, Japan
P116
pdf
New Theoretical Approach to Properties of Aluminum Alloys Based on Chemical Bond Nature of Constituent Atoms
S. Yamamoto1, M. Takeda2
1) Kyoto University, Japan, 2) Yokohama National University, Japan
P117
pdf
Effects of Clusters and Precipitates on Tensile Properties in Al-Mg-Si Alloys
K. Ikeda1, K. Terada1, M. Mitsuhara1, S. Hata1, H. Nakashima1, K. Takata2, M. Saga2, J. Takahashi2, K. Ushioda2, K. Kaneko1, M. Kikuchi1
1) Kyushu University, Japan, 2) Nippon Steel Corporation, Japan
P118
pdf
Explanations of Solid Solution Hardening (Softening), Age-Hardening (Softening) and Work Hardening (Softening) Based on Chemical Bonds
T. Tanabe, S. Yamamoto
Kyoto University, Japan
P119
pdf
Study on Dimensional Stability of Csf/Al Composites
G. Chen, L. Jiang, X. Wang, Z. Xiu, G. Wu, D. Sun
Harbin Institute of Technology, China
P120
pdf
An Experimental Study on Solid Solution Softening, Age Softening and Work Softening
M. Takeda1, T. Tanabe2
1) Yokohama National University, Japan, 2) Kyoto University, Japan
P121
pdf
Characterization of the AC2A Cylinder Head and Development of Its Heat Treatment Process
W. Kasprzak1, H. Onda2, M. Aniolek1, J.H. Sokolowski3, K. Akiyama2
1) CANMET Materials Technology Laboratory, Canada, 2) Nissan Motor Co, Ltd., Japan, 3) University of Windsor, Canada
P122
pdf
Image-based Simulation of Monotonic Crack Propagation through a 2024 Aluminum Alloy
H. Tsuruta1, H. Toda1, P. Qu 1, M. Kobayashi1, E. Maire2
1) Toyohashi University of Technology, Japan, 2) GEMPPM UMR, France
P123
pdf
Scandium Effect on Mechanical and Physical Properties for 2x19 Al Alloy
Y.Y. Lee
Agency for Defense Development, Korea
P124
pdf
A comparison of Air-fuel and Low-temperature Oxyfuel Burners for Aluminium Heating and Melting
J. Furu1, T.H. Bergstrøm2, K. Marthinsen1
1) Norwegian University of Science and Technology, Norway, 2) SINTEF, Norway
P125
pdf
The Effect of Zr, Misch Metal on Microstructure and Mechanical Properties of A6061 Alloy
S.H. Kim1, K.D. Woo1, D.S. Kang1, E.P. Kwon1, J.Y. Jeon1, K.J. Lee2
1) Chonbuk National University, Korea, 2) Korea Institute of Industrial Technology, Korea
P126
pdf
Visualization of Diffusive Hydrogen in Aluminum
T. Watakabe1, G. Itoh1, Y. Hatano2
1) Ibaraki University, Japan, 2) University of Toyama, Japan
P127
pdf
Novel Al-Cu-Mg-Ag Alloy for High Temperature Applications
I. Nikulin1, A. Kipelova, M. Gazizov, V. Teleshov, V. Zakharov, R. Kaibyshev
Belgorod State University, Russia
P128
pdf
Behavior of Hydrogen in Electrolitically Charged Aluminum Investigated by Means of Hydrogen Microprint Technique
T. Tsutsumi, T. Watakabe, G. Itoh, N. Itoh
Ibaraki University, Japan
P129 (link to Mater. Trans.)
pdf
Rapid Heating and Mechanical Properties of 6061 Aluminum Alloy Using High Frequency Induction Heating Apparatus
F. N. Shang1, E. Sekiya2, Y. Nakayama1
1) University of Yamanashi, Japan, 2) YS Electrics Co., Ltd., Japan
P130
pdf
Detection of Hydrogen in Ion-plated Pure Aluminum during Tensile Deformation
G. Itoh, H. Iwahashi, T. Shikagawa
Ibaraki University, Japan,
P131
pdf
Research on Influence of Forming Conditions on Springback in V-bending Process of Aluminum Sheet Alloys
Y. Ishii, S. Takahashi
Nihon University, Japan
P132
pdf
Effect of High Magnetic Field on Phase Transformation of 7055 Alloy during Homogenization
H. Lizi1, L. Xiehua2, Z. Haitao1, C. Jianzhong1
1) Northeastern University, China, 2) Chalco Ruimin Corporation Limited, China
P133
pdf
Coupled Surface and Microstructural Observations of Damage Accumulation during Bending of Al-Mg-Si Alloys
A. Wise1, T. Chezan1, J. Pool1, R. Rana1, P. De Smet2
1) Corus RD&T, Netherlands, 2) Aleris Aluminum Duffel BVBA, Belgium
P134
pdf
Fabrication of Porous Aluminum by Friction Stir Processing Route Precursor Method and its Mechanical Properties
Y. Hangai1, O. Kuwazuru2, S. Koyama1, M. Hasegawa3, T. Utsunomiya4, N. Yoshikawa5
1) Gunma University, Japan, 2) University of Fukui, Japan, 3) Yokohama National University, Japan, 4) Shibaura Institute of Technology, Japan, 5) The University of Tokyo, Japan
P135
pdf
The Effects of Microstructural Characteristics and Casting Defects on the Mechanical Failure of Al-based Alloys
I. Peter, M. Rosso
Politecnico di Torino, Italy
P136
pdf
Transfer and Sloshing Control of Molten Metal Using a Ladle with 6-Degrees-of-Freedom Robot Arm in Die Cast Process
T. Yamashita, W. Aribowo, K. Terashima
Toyohashi University of Technology, Japan
P137
pdf
Fatigue Strength of Al-evaporated Al-Zn Alloys with High Zn Concentration
T. Kanadani1, K. Nakagawa1, A. Sakakibara2, K. Murakami3, M. Hino3, N. Nishida3
1) Okayama University of Science, Japan, 2) Okayama University, Japan, 3) Industrial Technology Research Institute of Okayama Prefecture, Japan
P138
pdf
Investigation on Quench Sensitivity Characterization of Selected Heat-treatable Al Alloys Based on Jominy End Quench
Z. Li, B. Xiong ,Y. Zhang, B. Zhu, X. Li, H. Liu, F. Wang, P. Li, J. Liu
General Research Institute for Non-ferrous Metals, China
P139
pdf
Analysis of Crack-Tip Field via Observation of Local Crack Extension by Means of Fast Tomography Technique
S. Yamauchi1, H. Toda1, M. Kobayashi1, T. Hiramatsu1, E. Maire2
1) Toyohashi University of Technology, Japan, 2) GEMPPM UMR, France
P140
pdf
Effect of Mg and Zn Elements on the Mechanical Properties and Precipitates in 2099 Alloy
X.H. Zhu, Z.Q. Zheng, S. Zhong, H.Y. Li
Central South University, China
P141
pdf
Softening and Fatigue Fracture of Al-Si-X Alloys
J. Oshikiri1, N. Nakamura2, O. Umezawa1
1) Yokohama National University, Japan, 2) Kanagawa Industrial Technology Center, Japan
P142
pdf
Microstructure and Properties of an Al-7. 5Zn-1. 7Mg-1. 4Cu-0. 12Zr Alloy
X. Li, B. Xiong, Y. Zhang, Z. Li, B. Zhu, F. Wang, H. Liu
General Research Institute for Nonferrous Metals, China
P143
pdf
Evolution of Internal Stress During Cyclic Deformation of Al-4Cu as a Function of θ′ Precipitate State
W. Han1, A. Vinogradov2, C.R. Hutchinson1
1) Monash University, Australia, 2) Osaka City University, Japan
P144
pdf
Researches Concerning PoDFA Method for 5083 Alloys
M.A. Pana, P. Moldovan
University Politehnica of Bucharest, Romania
P145
pdf
Structure and Properties of Semiproducts from Al-Cu-Mg-Ag V-1213 Alloy
V.V. Antipov, R.O. Vakhromov, T.P. Phedorenko, E.A. Lukina
All-Russian Institute of Aviation Materials, Russia
P146
pdf
Effect of Magnesium Content on Age Hardening in Al-Si-Mg Alloy Castings
T. Ishikawa1, T. Kitamura2, M. Furui1, S. Ikeno1, M. Miura2, S. Saikawa2, N. Sakai2
1) University of Toyama, Japan, 2) Ahresty Corporation, Japan
P147
pdf
Effects of Crystallographic Orientation on Tensile Deformation in the Excess-Mg Type Al-Mg-Si Alloys
K. Iida1, K. Matsuda1, Y. Uetani2, S. Ikeno1
1) University of Toyama, Japan, 2) Toyama Prefectural University, Japan
P148
pdf
Effect of Mg , Si and Mn Content on Castability in Al-Mg Alloy
Y. Kano1, M. Furui1, S. Ikeno1, M. Miura2, S. Saikawa2
1) University of Toyama, Japan, 2) Ahresty Corporation, Japan
P149
pdf
Simulation of Elastoplastic Behavior of Casting Aluminum Alloy Using Artificial Neural Network
B. Chen, Q. Yuan, G. Chen, H. Liu
Chongqing University, China
P150
pdf
Improving the Mechanical Performance of a Secondary Cast Aluminium Piston Alloy through Addition of Minor Elements
T.O. Mbuya1, B.R. Mose2, S.P. Ng'ang'a2, S.M. Maranga2
1) University of Nairobi, Kenya, 2) Jomo Kenyatta University of Agriculture and Technology, Kenya

>>TOP